User manual SAMSUNG SEW3040

[. . . ] Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. [. . . ] 6 · Getting Started Voice activated (VOX) Select to monitor significant sound with reduced ambient noise. The screen goes off in "VOX" mode if there is no significant sound louder than a certain level within 1 minute. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera. In "VOX" mode, you can set the sensitivity with [ f1 ] in menu. Zoom button on the monitor to zoom in on the current Press the [ screen. Press the button again to zoom back out. 8l Sound level The louder the sound around the camera, the more LEOs turn on. Sleep Mode Press the [SLEEP] button to turn off the screen and save battery power. Your monitor will continue to detect sound around the camera. Press any button to turn the screen on again. If camera is disconnected, monitor screen would be turned on automatically in Sleep mode. Portable monitoring Slide the belt clip upwards to use the integrated belt clip on the monitor. When not in use, please push the clip back to its original position. Out of Range If the camera and monitor are not paired or if the monitor is outside of transmission range with the paired camera, the "Out of Range" message appears with warning beeps at regular intervals. Two-way talk Press the [TALK] button while talking to transfer audio to the camera. Digital Clock Displays the time that is set on the monitor. It only provides AM I PM time format and no 24hour format. 6 Monitor Speaker Mute Indicates the monitor speaker is muted. Once the monitor's speaker is muted, no sound from the camera is produced. If battery nearly empty, it will flash to alert user to charge up the unit. No Signal Warnings The "Out of Range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power. [. . . ] Before starting permanent installation, verify its performance by observing the image on the monitor when camera is positioned in the same location/position where it will be permanently installed and the monitor is placed in the location where it will be used most of the time. ~· Installation Warnings Aim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor. STRANGULATION HAZARD- Keep cord out of child Is reach. [. . . ]