User manual SAMSUNG SF-150

[. . . ] 01-cover 3/25/98 4:10 PM Page 1 ELECTRONICS P/N. JF68-60860A 01-cover 3/25/98 4:10 PM Page 2 Operator's Guide SAMSUNG FACSIMILE Please read this guide before you use this equipment. 0 00 000 0000 00 00 0000 000 0 Ch-1 3/25/98 6:09 PM Page 1 Thank You for Choosing Samsung! Your SF 150 facsimile machine represents the very latest in technology. It is a full-featured, highperformance device, built to Samsungs strict quality standards- the highest in the industry. Were proud to offer you a product that will provide convenience and dependability for years to come. Important Precautions and Safety Information When using your Samsung fax machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 1. [. . . ] The machine can transmit documents with the following size. 216mm 152mm Minimum Maximum Up to maximum of 1500mm 127mm The shaded parts of the document shown below are not recorded by the receiving facsimile machine. Write your information within the effective scanning area. 216mm 5mm approx. Feeding direction 1. 8mm approx. CHAPTER THREE : THE FAX MACHINE 3. 1 Ch-3 3/25/98 6:28 PM Page 3 3 THE FAX MACHINE Setting Resolution and Contrast After the document has been loaded, press or to adjust the brightness of your faxed document. By pressing or repeatedly, you can choose between LIGHT, AUTO, or DARK. AUTO works well for normal handwritten, typed, or printed documents. DARK works with light print or faint pencil markings. After the document has been loaded, press Resolution to increase the sharpness and clarity. By pressing Resolution repeatedly, you can choose between STANDARD, FINE, SUPER FINE or PHOTO mode. STANDARD works well for printed or type-written originals with normal-sized characters. FINE is good for documents containing a lot of detail. SUPER FINE works well for documents containing extremely fine detail. SUPER FINE works only if the remote machine also has the SUPER FINE feature. PHOTO is used when faxing photographs or other documents containing colour or shades of grey. When PHOTO is chosen, the FINE setting is automatically chosen. Loading a Document 1 Turn the document face down. 2 Insert the top edge of the document into the feeder slot. The automatic document feeder seizes and pulls in the page. For more information about resolution and contrast, see Setting Resolution and Contrast above. The LCD window briefly displays the message DOCUMENT LOADING, then prompts you to set the contrast if required. DOCUMENT LOADING LIGHT AUTO DARK 3. 2 CHAPTER THREE : THE FAX MACHINE Ch-3 3/25/98 6:28 PM Page 4 THE FAX MACHINE 3 If required, set the contrast of the document by pressing or . The selected mode flickers. The contrast is preset to AUTO. 1 Scroll/ Volume GHI 4 Redial/ Pause PQRS 7 For a normal document, skip over this step because it is not necessary to change the contrast. To skip this step, press Stop or wait for a second, then perform step 4. 4 If required, set the appropriate resolution by pressing Resolution until you find the desired setting. Speed Dial Rcv. Mode Resolution Menu Each time you press Resolution the selected mode appears in the LCD. Dialing a Number 1 Pick up handset. For hands-off operation, press OHD. The LCD window displays PHONE. PHONE 2 Using the number keypad, enter the number of the remote fax machine. Scroll/ Volume Redial/ Pause ABC DEF 2 1 1 GHI 2 JKL 3 MNO 4 PQRS 5 TUV 6 WXYZ OHD/ You can store One-Touch or Speed Dial numbers in your machine to dial your most frequently used numbers with the touch of a button. For more information, see page 4. 4. 7 Flash 8 0 9 Help Start/ Copy The LCD window displays the number you are dialing. 01952292033 If a person answers the telephone, ask him or her to press Start so that you can send the document. CHAPTER THREE : THE FAX MACHINE 3. 3 Ch-3 3/25/98 6:28 PM Page 5 3 THE FAX MACHINE 3 Press Start/Copy when you hear the fax tone. 8 0 9 Help Start/ Copy Stop You can cancel the transmission of a document at any time by pressing Stop. 4 Replace the handset. You can send or receive a Voice Request while sending a fax. For more information about the Voice Request feature, see page 3. 10. Confirming the Transmission When the last page of your document has been sent successfully, the machine beeps, the LCD window displays OK and returns to Standby Mode. If something went wrong during your transmission, an error message appears in the LCD. For a listing of LCD error messages and their meanings, see page 5. 6. OK If you receive an error message, press Stop to clear it and try to send the document again. For more information about canceling transmission, see below. You can set your machine to print a confirmation report automatically. For more information, see page 4. 9. Canceling Transmission 1 Press Stop at any time to cancel transmission. 9 Help Start/ Copy Stop The fax transmission is canceled and the machine returns to Standby Mode. STOP PRESSED 3. 4 CHAPTER THREE : THE FAX MACHINE Ch-3 3/25/98 6:28 PM Page 6 THE FAX MACHINE Receiving a Fax Reception Modes Your fax machine has four reception modes: In FAX mode, the machine answers an incoming call and immediately goes into receive mode, expecting a fax to be sent. [. . . ] Keep stored pages from touching each other face to face. If they touch, print can transfer from one to another. CHAPTER FIVE : CARE AND MAINTENANCE 5. 5 Ch-5 3/25/98 6:36 PM Page 7 5 CARE AND MAINTENANCE Understanding LCD Error Messages LCD message CHECK DOCUMENT Meaning The document you are sending has jammed in the feeder. See page 5. 1 Call the service center for help. CAM JAM NO PAPER Your machine is out of paper or the paper cover is open. See page 2. 2 NOT ASSIGNED The One-Touch or Speed Dial number you tried to use has no number programmed into it. [. . . ]