User manual SAMSUNG SF-430

[. . . ] SF-430 Home Visit us at: www. samsungelectronics. com/mfp P/N: JB68-00677A Rev. 2. 00 Important Precautions and Safety Information When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 1 2 3 4 Read and understand all instructions. Use common sense whenever operating electrical appliances. Follow all warnings and instructions marked on the product and in the literature accompanying the product. [. . . ] If the product does not detect a fax signal, it will continue ringing to tell you it is a phone call. You should pick up the handset to answer the call, or it will switch to automatic reception mode. 5. 16 FAX Receiving Automatically in ANS/ FAX Mode For this mode, you must attach an answering machine to the EXT jack on the back of your product (see page 1. 9). 1 2 Press Receive Mode on the front panel repeatedly until you see "ANS/FAX". When you receive a call, the answering machine will answer. If the caller leaves a message, the answering machine stores the message as it would normally. If your product hears a fax tone on the line, it automatically starts to receive the fax. NOTES: · If you have set your product to ANS/FAX mode and your answering machine is switched off, or no answering machine is connected to your product, your product will automatically go into FAX mode after predefined rings. The ring count may vary depending on your country. · If your answering machine has a `user-selectable ring counter', set the product to answer incoming calls within 1 ring. · If you are in TEL mode (manual reception) when the answering machine is connected to your product, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation. 5 FAX 5. 17 Receiving Manually in TEL Mode You can answer calls using the handset, and start the product to receive a fax. 1 2 3 Press Receive Mode on the front panel repeatedly until you see "TEL". When the telephone rings, pick up the handset and answer it. If you hear a fax tone, or if the person on the other end asks you to receive a document, press Start FAX Black or Start FAX Color. The product begins receiving and returns to Standby mode when the reception is complete. 4 Receiving Manually Using an Extension Telephone This features works best when you are using an extension telephone connected to the EXT jack on back of your product (see page 1. 9). You can receive a fax from someone you are talking to on the extension telephone without having to go to the fax machine. When you receive a call on the extension phone and hear fax tones, press the keys "*9*" (star nine star) on the extension telephone. If you still hear the fax tone from the remote machine, try pressing "*9*" once again. "*9*" is the remote receive start code preset at the factory. The first and the last asterisks are fixed, but you can change the middle number to whatever you choose. For more information, see page 5. 41. 5. 18 FAX Receiving Using DRPD Feature You can not set `DRPD (Distinctive Ring Pattern Detection)' as the receive mode using the Receive Mode button on the front panel if you have not set up your product for use with the DRPD service and turned on the feature (see page 5. 41). When the receive mode is set to "DRPD, " if someone calls using the number assigned for telephone communication, your product rings in the pattern you registered for voice calls. When you hear this pattern, simply pick up the handset of the telephone connected to your product and talk. When someone sends a fax using the number assigned for fax communication, your product receives the fax automatically. You can select the other receive mode using Receive Mode button on the operation panel to temporarily disable the DRPD service. Receiving in Colour Your product has been set to receive faxes in colour from fax machines with colour capability. When receiving a fax, your product detects if the incoming fax is in colour or black and white, and prints the fax accordingly. 5 Receiving Fax in Memory Since your product is a multitasking device, it can receive faxes while you are making copies or printing. [. . . ] 2. 5 Paper jams, clear . . . . . . . . . . . . . . . . . . . 1. 45 Reports, print . . . . . . . . . . . . . . . . . . . . . . . 5. 36 Restrict colour copy . . . . . . . . . . . . . . . . . . . . . 1. 44 Reverse page order copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]