User manual SAMSUNG SF-5100I

[. . . ] 00-Cover 12/10/99 5:16 AM Page 1 Laser Facsimile User's Guide SF-5100/SF-5100P 01-Contents 12/10/99 6:42 AM Page 1 Trademark Notices · SF-5100, SF-5100P and Samsung Logo are trademarks of Samsung Electronics Co. , Ltd. · Windows is a trademark of Microsoft Corporation. · IBM is a trademark of international Business Machines. · Centronics is a trademark of Centronics Data Computer Corporation. [. . . ] The document will be scanned into the memory before transmission. The display shows the memory capacity and the number of pages being stored in the memory, then the machine begins sending the document in order of the numbers you entered. Advanced fax 4. 1 05-Advanced 12/10/99 5:59 AM Page 4 Note: If `MEMORY FULL' occurs while scanning into the memory, the display will show: JOB CANCEL DONE Press or to select the option you want. If you select CANCEL, broadcasting is cancelled. If you select DONE, your machine performs broadcasting only with the pages already scanned. If an error occurs while sending to a specific number, the machine transmits the document to all the other numbers, then retries the number that previously recorded an error. After completing transmission, your machine prints the multi-communication report. Delayed fax You can set your machine to send a fax at a later time when you will not be present. If necessary, adjust Resolution, or Contrast. Press Advanced FAX on the control panel. The display shows the first menu; BROADCASTING. 3. Press or until `DELAYED FAX' appears, then press Start/Enter. Enter the number of the remote machine, then press Start/Enter. To enter the number, you can also press a one-touch button including Group dial button. Otherwise, press Speed, enter a 2-digit speed dial number, then press Start/Enter. The stored number appears on the display. 5. Press Start/Enter to confirm the number. The display asks you to enter another fax number to send the document to another location. 4. 2 Advanced fax 05-Advanced 12/10/99 5:59 AM Page 5 6. If you want to send to more than one location, enter another fax number using the number keypad, one-touch dial, or 2-digit speed dial number. Note that you cannot use group dial numbers for another fax number. Press Start/Enter to confirm the number. Or To send to one location or when you complete the last fax number setting, press Start/Enter. 7. If you want to assign a name to the transmission, enter the name. For details on how to enter the name using the number keypad, see page 2. 3. 8. [. . . ] San Jose, CA 95134 7. 2 Appendix 09-Appendix 12/10/99 5:24 AM Page 5 Laser safety statement The facsimile is certified in the U. S to conform to the requirements of DHHS 21 CFR Subchapter J for Class I(1) laser products, and certified elsewhere as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and facsimile are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service conditions. WARNING Never operate or service the facsimile with the protective cover removed from the Laser/Scanner assembly. The reflected beam, although invisible, can cause eye damage. CAUTION - INVISIBLE LASER RADIATION WHEN THIS COVER IS OPEN. [. . . ]