User manual SAMSUNG SGH-A707

[. . . ] SGH-A707 Series PORTABLE MOBILE Quad-BAND PHONE User Guide Please read this manual before operating your phone, and keep it for future reference. A707CFJ4_PS_101306_F5 Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the "Phone System"), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. [. . . ] To create a new connection, press the Options soft key, select New, and press the Select soft key or the - or - key. 6. To edit the existing Cingular MMS, highlight this entry, press the Options soft key, select Edit, and press the Select soft key or the key. 7. Select the parameter you want to edit: Set Name: enter a profile name. Access Name: edit the access point name. Auth Type: select the type of authentication used for this WAP connection: None, Normal, or Secure. Section 8: Changing Your Settings 89 User ID: enter the User ID required to connect to the network. Password: enter the user password required to connect to the network. Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or Other. Home URL: enter the URL address of the page to be used as your homepage. Gateway address: (wap1. x only) enter the gateway address of the proxy server. Proxy address: (wap2. x and Cingualr MMS) set the proxy server address and port. Linger Time (Sec. ): set a time period (in seconds) after which the network is disconnected if there has been no new data traffic in that time. Advanced Settings: allows you to configure some of the IP-specific information: Static IP, Static DNS, Server information, and Traffic Class. Static IP: specify if you want to manually enter an IP address. If you want the IP address to be automatically assigned by the server, remove the check mark. Local phone IP: enter the IP address obtained from the network operator, if you checked the Static IP option. Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. If you want the address to be automatically assigned by the server, remove the check mark. Server 1/Server 2: enter the Domain Name Server (DNS) addresses. Traffic class: select the traffic class. Note: The WAP settings may vary depending on the service provider. Configuring your Phone's USB Connection Your phone can connect to a PC via the included USB cable. The phone can be configured to open launch a default application when an active USB connection is detected. 1. Use the USB adapter cable to connect the handset to the target PC. When an active connection has been established, a USB icon ( the phone. 2. [. . . ] Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Product will be warranted for a period equal to the remainder of the original Limited Warranty on the original Product or for 90 ays, whichever is longer. All replaced parts, components, boards and equipment shall become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such Product. [. . . ]