User manual SAMSUNG SGH-ZV30 DATASHEET

[. . . ] Searching for and Dialling a Number in the Phonebook . Dialling a Number Using the Service Directory or Information Numbers . 36 38 41 42 43 The information in this manual is believed to be correct at the time of printing; Samsung reserves the right, however, to change or modify any of the specifications without notice. Some of the contents in this manual may differ from your phone, depending on the software installed, your SIM card or your service provider. 1 Contents (continued) Entering Text . [. . . ] Tone: each key, when pressed, generates a different sound. Beep: each key, when pressed, generates the same sound. This option allows you to indicate how you are to be informed of any incoming calls. Light Only: only the backlight is switched on; the phone neither rings nor vibrates. Melody: the phone rings using the tone selected via the Ring Tone menu option. Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three times and then starts ringing. Note: To toggle between the current alert type and the Silent mode, hold down . 86 87 Tones Tones Message Tone Menu 4-6 Error Tone Menu 4-8 This option allows you to indicate how you are to be informed that you have received a new message. SMS Tone1 ~ SMS Tone5: the phone rings using the selected SMS tone. Light Only: the service light on the top of the phone flashes. Vibration: the phone vibrates but does not ring. This option allows you to select how the phone informs you that you have made a mistake. ON: the phone beeps to indicate an invalid entry. Minute Minder Menu 4-9 Power On/Off Menu 4-7 This option allows you to specify whether the phone must beep every minute during an outgoing call to keep you informed of the length of your call. ON: the phone beeps every minute. This option allows you to select the tone that you will hear when you switch your phone on or off. OFF: the number is not redialled. Backlight You can specify whether or not the phone uses the backlight. A marginal increase in standby/talk time can be achieved by turning the backlight off. Short: the backlight comes on when you press a key or receive a call and switches off 10 seconds after the last key is pressed. Long: the backlight comes on when you press a key or receive a call and switches off 20 seconds after the last key is pressed. 92 Auto Answer With the Auto Answer function, the phone automatically answers calls after 3, 5 or 10 seconds. You can also turn this feature off. Note: This feature is only available when the phone is connected to a car kit (optional). 93 Settings Settings Caller ID You can prevent your phone number from being displayed on the phone of the person being called. Note: Some networks do not allow the user to change this setting. Reset Settings You can easily reset your phone to its default configuration. Before proceeding, you must enter the phone's 4-digit password. Note: The password is preset to 0000. To change this password, refer to page 107. The following options are available. Default: the default setting provided by the network is used. Hide Number: your number is not displayed on the other person's phone. Send Number: your number is sent each time you make a call. Active Line Some SIM cards may be used with two subscriber numbers (network service). This function is only available if your SIM card supports it. [. . . ] · Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards. · Do not drop, knock or shake the phone. [. . . ]