User manual SAMSUNG SH-M522C

[. . . ] Visit the Customer Support homepage of the Samsung Electronics Optical Media Solution Division (Http://samsung. com) to find out about the latest Samsung ODD firmwares and learn how to use them. Main Page Safety Precautions Notational Installation While Operating Other Using the Drive Using the COMBO Drive Storing and Cleaning Your Discs MAGIC SPEED Upgrading the Firmware Flash Memory System Requirements Introduction Front Rear Troubleshooting Solving Recording Problems Caution with errors Solving Technical Problems Setup Installing the COMBO Drive Connecting the Cables Installing the CD Record Utility Installing the Device Driver Setting Up the Device Driver Specifications Safety Precautions Warning / Caution Warning : This symbol indicates explanations about extremely dangerous matters. If users ignore this symbol and handle the device the wrong way, serious injury or death could result. Caution : This symbol indicates explanations about dangerous matters. If users ignore this symbol and handle the device the wrong way, damage to home or property could result. [. . . ] Do not drop a disc or place heavy objects on it. Do not touch the surface of a disc; hold it by the edges. To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. Do not leave the disc compartment open when you are not using it. Us ing the D rive What is a MAGIC SPEED? The MAGIC SPEED provides a function that user optionally chooses the disc reading speeds, high speed (Max speed) mode and low noise (X32) mode. The low noise mode offers the best PC environment by minimizing a driving noise. The Magic speed not only functions to decrease a noise by reducing a reading speed but also gets a preventive effect of a disc breakage, which could be occurred by a high speed. Its purpose is to supply the stable PC environment to user. Explanation of MAGIC SPEED Mode and Ways to use Explanation of MAGIC SPEED Mode The Maximum Speed Mode : Set up this mode when you want to read a disc by the maximum speed which is supplied by a drive. The Low Noise Mode : Set up this mode when you want to read a disc by a stable speed, the low speed (X32). The mode selected and set using the Magic Speed feature does not change when you connect the driver to a different PC. Make sure you check the settings before use. Caution: In case of a cracked disc, the disc would be broken if operating in the maximum speed. Therefore, it is recommended to operate in the low noise mode or to immediately make a copy and use it. Ways to Use the MAGIC SPEED The first of all, please install the Magic Speed program from Samsung's homepage. Operate the program by clicking the right mouse button on the MAGIC SPEED Tray Icon. Select a desired mode from a program window, and click "Setup" The reading speed of a drive operates in a selected mode. Close the program window by selecting "Close". At this time, the reading speed will keep operating by the changed speed unless you would change a mode and would end a program. It is recommended to use a "Maximum Speed Mode" when operating a Data Copy & a Disc Copy and to use a "Low Noise Mode" when operating a general operation. Other Function How to deactivate the automatic operation: This program automatically runs when PC is booting up. If you wish to deactivate the automatic operation, deactivate the selected Automatic Operation item in the tray (or task tray) menu. Place to download a MAGIC SPEED Samsung's Customer Service Homepage (URL:www. samsung-ODD. com) - Select a Firmware > MAGIC SPEED. Us ing the D rive Upgrading the Firmware Flash Memory The product firmware can be upgraded by downloading the updated file from the following Web site: Http://samsung. com Http://samsung-ODD. com Us ing the D rive System Requirements Before you install the COMBO drive, we strongly recommend that you check that your setup meets the system requirements listed below. Item Computer Free expansion unit Disk space Windows version MS-DOS Description Intel Pentium II 400MHz/Celeron 466A(or higher), 128 MB of RAM (or higher) with an 80pin IDE interface for Ultra DMA. Create an image file and then copy the image file to the COMBO drive. There are two recording methods : Low-speed (file by file) High-speed (transfer of an image file from the hard disk) If the transfer speed of the CD-ROM drive is slower than the record speed, reduce the record speed. Note The COMBO Drive provide a High Speed rewriting Disc recording function (CD-RW 24X, 32X). [. . . ] Change the IDE cable and reconnect it to the computer. Preferably, connect a second IDE cable to the COMBO drive in master mode. Check the position of the jumper in the master/slave select terminal. The COMBO drive is not recognized by MS-DOS. Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site. - Http://samsung. com - Http://samsung-ODD. com This case may occur when there is a Windows installation problem; reinstall Windows. [. . . ]