User manual SAMSUNG SH-18AC0

[. . . ] OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D'UTILISATION Indoor unit AS24A5(6)RCD AST24A5(6)RB(E)D SC24AC5(6) SC24TA5(6)(8)D AS18A9(0)RB(C)(D)(E)D SC18ZA9(0)D SC18AC9(0) AS12AA(B)MB(E) SC12ZAA(B) SC12ACA(B) AS09A5(6)MB(D)(E)D SC09ZA5(6)D SC09ACA(B) AS07A5(6)MB(D)(E)D SC07ZA5(6)D SC07AC5(6) Indoor unit AS24B5(6)RCD AST24B5(6)RB(E)D SC24TB5(6)(8)D AS18B9(0)RB(C)(D)(E)D SC18ZB9(0)D AS12BA(B)MB(E) SC12ZBA(B) AS09B5(6)MB(D)(E)D SC09ZB5(6)D AS07B5(6)MB(D)(E)D SC07ZB5(6)D AST24C5(6)RE(B) AST18C9(0)RE(B) AS12CA(B)ME(B) AS09C5(6)ME(B) AS07C5(6)ME(B) AST18A9(0)REF AST18C9(0)REF ESPAÑOL FRANÇAIS Split-type Room Air Conditioner (Cool) Aire acondicionado doméstico sistema Split (Refrigeración) Climatiseur de type Séparé (Refroidissement) E S F A DB98-03808A(4) ENGLISH Safety Precautions The following safety precautions must be taken when using your air conditioner. 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. [. . . ] IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press the MODE button. x The air conditioner runs in COOL mode. You can change modes at any time. Note 3 To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: x Each time you press the TEMPERATURE buttons: - The temperature is adjusted by 1°C - The indoor unit beeps x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. x If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating. 4 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Automatic (rotated : Low Medium High Turbo(maximum) Result: Each time you press the FAN button, the indoor unit beeps. ) 5 To control the direction of the air flow, refer to page 15. E-11 Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible. Example : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the Result: (On/Off) button. x The air conditioner starts up in Cool mode with Turbo fan speed. x The 5 Way indicator on the indoor unit lights up. x The indoor unit beeps. 2 Press the Result: button. x The temperature and fan settings are adjusted automatically. x The indoor unit beeps. 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: x The indoor unit beeps each time you press the MODE button. You can change modes at any time. Note 3 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. 4 To control the direction of the air flow, refer to page 15. E-14 Adjusting the Air Flow Direction Vertically ENGLISH Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the SWING button one or more times as required. Result: The outer blade is adjusted vertically. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the SWING button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the SWING button again. Set to the initial position powered. Note Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. [. . . ] Indoor Humidity 80% or less - Outdoor Temperature 21°C to 43°C approx. 18°C to 43°C approx. If the cooling operation is used at over 33°C(indoor temperature) then, it does not cool as its full capacity. Cleaning Your Air Conditioner 07/09/12 To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. IMPORTANT Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit. 1 Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit. 2 07/09/12, SCAC Disassemble the front grille by pulling it forwards. 18/24 18/24 The removal of the front grille facilitates your cleaning the air conditioner. After opening the front grille, lift up to the max, and pull to release them and vice versa. [. . . ]