User manual SAMSUNG SH-30ZA2

[. . . ] OWNER'S INSTRUCTIONS MANUAL DE INSTRUCCIONES ISTRUZIONI PER L'USO MANUAL DE INSTRUES MANUEL D'UTILISATION GEBRAUCHSANWEISUNG TM TM Indoor unit SC30ZA2 SC30ZC1(C2)(C3)(C4) AST30C1(C2)(C3)(C4)BE AST32C1(C2)BE AS30C1(C2)(C3)(C4)BC AS32C1(C2)(C3)(C4)BC Outdoor unit SC30ZA2X SC30ZC1(C2)(C3)(C4)X UST30C1(C2)(C3)(C4)BE UST32C1(C2)BE US30C1(C2)(C3)(C4)BC US32C1(C2)(C3)(C4)BC IAIPOYMENO KIMATITMTIKO MATIOY (~) (i) E S I P F D G R DB98-04803A(5) RUSSIAN EHNIKA DEUTSCH Split-type Room Air Conditioner (Cool) Aire acondicionado domstico sistema Split (Refrigeracin) Condizionatore d'aria per ambienti ad unit Separate (Raffreddamento) Aparelho de ar condicionado tipo Split (Refrigerao) Climatiseur de type Spar (Refroidissement) Geteilte raumklimaanlage (Khlen) FRANAIS PORTUGUS ITALIANO ESPAOL ENGLISH Safety Precautions The following safety precautions must be taken when using your air conditioner. 1 Make sure that the indoor unit is correctly ventilated at all times; do NOT place clothing or other materials over it. NEVER spill liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. [. . . ] The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed at the top of the remote control, press the MODE button on the remote control one or more times until it appears. Result: The indoor unit beeps each time you press the MODE button. You can change modes at any time. Note 3 To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed. Possible temperatures are between 18C and 30C inclusive. Result: Each time you press the TEMPERATURE buttons: - The temperature is adjusted by 1C - The indoor unit beeps The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate. 4 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Automatic (rotated : Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. ) 5 To control the direction of the air flow, refer to page 15. E-11 Changing the Room Temperature Quickly The Turbo cooling function is used to cool your room as quickly as possible. Example : You have just come home and find that the room is very hot. You wish to cool it down as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 If necessary, press the Result: (On/Off) button. The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selected when the unit was last used. The indoor unit beeps. 2 Press the Result: button. The temperature and fan settings are adjusted automatically. The air conditioner cools the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. But, if you press the button in DRY or FAN mode, it will change to AUTO mode automatically. 3 If you wish to stop the Turbo function before the end of the 30-minute period, press the button one or more times until or disappears. You can change modes at any time. Note 3 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. 4 To control the direction of the air flow, refer to page 15. E-14 Adjusting the Air Flow Direction Vertically ENGLISH Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the SWING button one or more times as required. Result: The outer blade is adjusted vertically. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the SWING button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the SWING button again. Set to the initial position powered. Note Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. [. . . ] 18C to 43C approx. If the cooling operation is used at over 33C(indoor temperature) then, it does not cool as its full capacity. Cleaning Your Air Conditioner To get the best possible use out of your air conditioner, you must clean it regularly to remove the dust that accumulates on the air filter. IMPORTANT 1 Before cleaning your air conditioner, ensure that you have switched off the breaker used for the unit. Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit. Disassemble the front grille by pulling it forwards. Lift out the bottom edge of the air filters and pull down to release them. [. . . ]