User manual SAMSUNG SHR-1010

[. . . ] GB DIGITAL VIDEO RECORDER SHR-1010 User's Manual Class A (Industrial) - This device is for industrial use and qualified for electromagnetic waves restriction - For the safety use of this device, please read and heed all "Safety Warnings and Cautions" DIGITAL VIDEO RECORDER GB GB CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safety Instructions 1. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat. [. . . ] If the input video signal is NTSC, a maximum of 30 FPS (Fields Per Second) can be recorded; if it is PAL, a maximum of 25 FPS can be recorded. However, when recording with `Very High'setting, you could record 15. 00 FPS max for NTSC and 12. 50 FPS max for PAL. 1) NTSC [30. 00FPS/15. 00FPS/10. 00FPS/7. 50FPS/5. 00FPS/2. 50FPS/1. 00FPS/0. 50FPS] 2) PAL [25. 00FPS/12. 50FPS/8. 33FPS/6. 25FPS/5. 00FPS/2. 50FPS/1. 00FPS/0. 50FPS] OSD POSITION (System Process Mark Position) It determines where the system process mark will be displayed on the screen. Each symbol indicates different positions, TL for the top left, TR for the top right, BL for the bottom left, and BR for the bottom right. When setting to Center, it is displayed in the center of screen. [TL/TR/BL/BR/CENTER] ~ LANGUAGE ENGLISH (Language Selection Function) Select an OSD language to be displayed on the screen. You can choose a language among English, Spanish, Italian, German, and French. If you select a language and hit , it will be selected. [ENGLISH/ESPANOL/ITALIANO/DEUTSCH/FRANCAIS] 3-11 3-12 DIGITAL VIDEO RECORDER GB GB Note The following table shows how long it takes to fill up 40GB and 80GB HDD for each field rate when the image signal is NTSC and PAL respectively. (The recording time for each field rate may slightly vary depending on the type of input image signal. ) Time-Lapse Mode Picture Rate 30. 00 FPS 15. 00 FPS 10. 00 FPS Very High 40GB 18. 5 hr 27. 8 hr 37. 0 hr 55. 6 hr 80GB 37. 0 hr 55. 6 hr 74. 1 hr 111. 1 hr High 40GB 18. 5 hr 30. 9 hr 46. 3 hr 61. 7 hr 92. 6 hr Standard 80GB 49. 4 hr 98. 8 hr Low 40GB 37. 0 hr 80GB 74. 1 hr 80GB 40GB 37. 0 hr 61. 7 hr 92. 6 hr 24. 7 hr 49. 4 hr 74. 1 hr Note If you set the DISK END mode to STOP, the HDD free space capacity will be displayed but if you set the mode to CONTINUE, such capacity will not be displayed. RECORD MODE SETUP PICTURE QUALITY PICTURE RATE DISK END MODE DISK END BUZZER HIGH 30. 00FPS STOP OFF HDD FREE SPACE : 99% :MOVE 74. 1 hr 148. 1 hr :SELECT MENU:EXIT 148. 1 hr 111. 1 hr 222. 2 hr 197. 5 hr 148. 1 hr 296. 3 hr NTSC 7. 50 FPS 5. 00 FPS 2. 50 FPS 1. 00 FPS 0. 50 FPS 25. 00 FPS 12. 50 FPS 8. 33 FPS 123. 5 hr 98. 8 hr 185. 2 hr 148. 1 hr 296. 3 hr 222. 2 hr 444. 4 hr DISK END BUZZER It will be activated when you set the DISK END mode to STOP to enable setup. If set to ON, the Buzzer will sound when the HDD is full during the recording; if set to OFF, the Buzzer will not sound. [ON/OFF] 111. 1 hr 222. 2 hr 185. 2 hr 370. 4 hr 296. 3 hr 592. 6 hr 444. 4 hr 888. 9 hr 277. 8 hr 555. 6 hr 463. 0 hr 925. 9 hr 740. 7 hr 1481. 5 hr 1111. 1 hr 2222. 2 hr 555. 6 hr 1111. 1 hr 925. 9 hr 1851. 9 hr 1481. 5 hr 2963. 0 hr 2222. 2 hr 4444. 4 hr 18. 5 hr 27. 8 hr 37. 0 hr 46. 3 hr 92. 6 hr 37. 0 hr 55. 6 hr 74. 1 hr 92. 6 hr 18. 5 hr 30. 9 hr 46. 3 hr 61. 7 hr 77. 2 hr 37. 0 hr 61. 7 hr 92. 6 hr 29. 6 hr 59. 3 hr 88. 9 hr 49. 4 hr 98. 8 hr 37. 0 hr 74. 1 hr 74. 1 hr 148. 1 hr 148. 2 hr 111. 2 hr 222. 3 hr PAL 6. 25 FPS 5. 00 FPS 2. 50 FPS 1. 00 FPS 0. 50 FPS 123. 5 hr 118. 5 hr 197. 5 hr 148. 1 hr 296. 3 hr 154. 3 hr 148. 1 hr 246. 9 hr 185. 2 hr 370. 4 hr 185. 2 hr 154. 3 hr 308. 6 hr 296. 3 hr 493. 8 hr 370. 4 hr 740. 7 hr 231. 5 hr 463. 0 hr 385. 8 hr 771. 6 hr 740. 7 hr 1234. 6 hr 925. 9 hr 1851. 9 hr 463. 0 hr 925. 9 hr 771. 6 hr 1543. 2 hr 1481. 5 hr 2469. 1 hr 1851. 9 hr 3703. 7 hr DISK END MODE (In case of no margin in the HDD space) - If you set to STOP, the system will pause recording when the HDD is full of data and the message, "HDD FULL" will pop up. - If you set it to CONTINUE, recording is kept on overwriting current recording data to former recorded data. Overwriting is started from the old section of stored data. 2003-01-12 13:43:42 HDD FULL! 3-13 3-14 DIGITAL VIDEO RECORDER GB 6Al arm Record Setup The following illustrates the intial setting of the ALARM RECORD SETUP menu. 7 ALARM RECORD SETUP ALARM ENABLE ALARM DETECT TYPE ALARM BUZZER ALARM TIME ALARM PICTURE RATE OFF NC OFF 10 sec 30. 00FPS :MOVE GB Reservation Record Setup The following illustrates the intial setting of the TIMER RECORD SETUP menu. q x ALARM ENABLE To set whether to start recording or not when alarm go off. If you want to start recording when alarming, set it ON, if not set it OFF. If you exit the menu after setting ON for ALARM ENABLE, system starts recording whenever alarm go off. To stop the recording started by alarm intentionally, push the STOP/ENTER( ) button. [ON/OFF] :SELECT MENU:EXIT y ALARM DETECT TYPE Set to N. (Normally Close) when the alarm input is Active High, and set to N. O. (Normally Open) when the alarm input is Active Low. [N. C. /N. O. ] ALARM BUZZER Set to ON to have the system activate the Buzzer when a motion is deteced in the input video or when alarm occurs, or set to OFF to keep the Buzzer inactive. [ON/OFF] ALARM TIME It determines the time of alarm recording from 10 second (OFF) to 5 minutes when the system detects any movement or alarm in the input image. If you set it to AUTO, alarm recording will be implemented during the alarm-generating signal is in active state. [5MINUTE/4MINUTE/3MINUTE/2MINUTE/1MINUTE/30SECOND/20SECOND/ 10SECOND/AUTO] Reservation Recording function is a function TIMER RECORD SETUP which enables recording automatically when you TIMER DAY START END 01 OFF OFF --:-- --:-are not at home, you could set the system to 02 OFF OFF --:-- --:-03 OFF OFF --:-- --:-implement recording at desired day of the week, 04 OFF OFF --:-- --:-05 OFF OFF --:-- --:-desired time duration. [. . . ] - Absolutely normal according to the system standard - Check the power cable connection of the system and monitor and power supply. - Check the connection between camera output port and system image signal input port and between monitor image signal input port and system image signal output port. - Check the BNC Cable connected to the system. - No voice during play - After power supply, no further progress - Please call the service center or the shop where you bought the product for investigation or repair. available after booting menu screen - No voice - Check the connection between microphone voice output port and system voice signal input port and between monitor voice signal input port and system voice signal output port. [. . . ]