User manual SAMSUNG SHR-2040P-GAR

[. . . ] Real Time DVR SHR-2040/2041/2042 User's Manual SHR-2040/2041/2042 USER'S MANUAL Safety Regulations Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. Do not use multiple plugs at once. This may cause abnormal heat generation or fire Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you. This may cause fire. This imperfect connection may cause fire. This may cause fire or electric shock. Do not bend the power cord forcibly nor put a heavy material on it. Do not touch the power plug with wet hands. Insert the power plug firmly enough not to shake. Keep the product off humidity, dust, or soot. Do not put metals(coin, hair pin, metal piece, etc. ) or inflammable materials(match, paper, etc. ) in the ventilation hole. This may cause fire. Keep the surrounding temperature between 0°C to 40°C and keep the product off humidity. This may cause breakdown. This may cause abnormal operation due to high temperature. Secure sufficient ventilation. Keep the product off direct ray of light or heat from the heating device This may cause fire. [. . . ] It's because the RS-485 port setup was done for Remote Control Device. The some functions of PTZ camera are used under restriction. Note When using the remote controller (SCC2000), direct camera control is available only for Samsung Protocol in the remote controller (refer to the SCC2000 user manual). If there is no PTZ control within the maximum 5 minutes in DVR, the PTZ mode is cancelled automatically. It is for PTZ control in the remote viewer while not controlling PTZ. 6-2 SHR-2040/2041/2042 USER'S MANUAL 2 Basic Operation of PAN, TILT, & ZOOM PAN Press the LEFT or RIGHT button in front SHR-2040/2041/2042 in PTZ Camera Control Mode to control PTZ Camera horizontally. PTZ TELE WIDE VIEW PRESET TILT Press the UP or DOWN button in front SHR-2040/2041/2042 in PTZ Camera Control Mode to control PTZ Camera vertically. PTZ TELE WIDE VIEW PRESET ZOOM Press the TELE/WIDE button in front SHR-2040/2041/2042 in PTZ Camera Control Mode to zoom in or out PTZ Camera. PTZ TELE WIDE VIEW PRESET 6-3 3 Preset Setup Records a certain position of PTZ Camera. Memorizes up to 20 PTZ Camera positions at the moment. Note For AD Protocol PTZ Camera, this memorizes only 7 Presets. Press the Preset button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to set up Preset. PTZ TELE WIDE VIEW PRESET After Preset setup, press ENTER. 6-4 SHR-2040/2041/2042 USER'S MANUAL Move the cursor to right and press ENTER in PTZ Control Mode first. Then, press the "Enter" to run P/T/Z/ operation mode in the PIP screen and press the "Enter" again to cancel P/T/Z/ Motion Mode. Press Enter at the Position Name position to see Virtual Keyboard. Enter the type position name and press the "OK" to save the position and position name. Press the "Del" to delete both Position and Position Name with the number. Click the Press Del on the top to delete all positions and position names in memory. 6-5 4 Camera Menu Setup Camera Menu is a menu supplied by PTZ Camera itself. This Menu sets up several conditions of PTZ Camera. Note Pan. or Samsung Protocol Camera only is authorized for Camera Menu setup. Press the Preset button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to select Camera Menu. PTZ TELE WIDE VIEW PRESET Press the "Preset" button in front of SHR-2040/2041/2042 to return to the upper menu from camera menu. 6-6 SHR-2040/2041/2042 USER'S MANUAL 5 Preset View Preset setup allows your movement to a certain saved position of PTZ Camera. Press the VIEW button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to select Preset. (For example, Samsung Protocol) PTZ TELE WIDE VIEW PRESET (For example, Samsung Protocol) Control the cursor until it reaches a preset position number that you want to move and you can check it in the right PIP Screen. 6-7 6 Other View Press the "VIEW" button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to supply PTZ Camera. This is a very special function. Note Samsung, Pan. , Pel-P, or Pel-D Protocol PTZ Camera supports this function. Samsung : Auto Pan / Scan / Pattern Pan. : Auto Pan / Sequence / Sort Pel-(P, D) : Auto Scan / Frame Scan / Pattern PTZ TELE WIDE VIEW PRESET Preset Auto Pan Scan Pattern EXIT Preset Auto Pan Sequence Sort EXIT Preset Auto Scan Frame Scan Pattern EXIT Samsung Pan. Pel. After you select a function, press Enter. Then the function will be checked and start running. If you select other function during the operation, the previous function will be unchecked and the current function will be checked. (For example, Samsung Protocol) If you put P/T/Z/ during the operation or enter the Preset Setup or Camera Menu Setup during the operation, the function in action will be suspended and unchecked. Restarting SHR-2040/2041/2042 system during the operation has no effect. The function continues its duty and remains checked. 6-8 Chapter 7 Recording 7 SHR-2040/2041/2042 USER'S MANUAL 1 REC (Normal Recording) Pressing REC the button starts recording as set in the record mode. Then, REC LED lights on and a recording icon appears on the screen. During the recording in HDD, the front HDD LED blinks. [. . . ] SHR-2040/2041/2042 DVR allows no more than 3 users' connection with Smart Viewer at a time. - Check the Network setup of SHR-2040/2041/2042 DVR. - When you use DHCP/ADSL(PPPoE) for connection, please check if you get the right SHR-2040/2041/2042 DVR MAC Address. - If SHR-2040/2041/2042 DVR is connected to the ADSL network, please check if Bandwidth is set below 600 Kbps. [. . . ]