User manual SAMSUNG SHR-2080P

[. . . ] Real Time DVR SHR-2160/2162/2080/2082 User's Manual English Contents v vi Safety Regulations Before we start Standards Approvals 1 1-1 1-2 1-3 2 2-1 2-2 2-3 3 3-1 3-3 3-5 3-6 3-9 4 4-1 4-2 4-5 4-6 4-7 4-8 Chapter 1 Overview 1. Part Names and Functions Chapter 2 Installation 1. HDD Addition Chapter 3 Connecting with Other devices 1. Connecting Video, Audio, & Monitor 2. [. . . ] Once the first digit is determined, the remaining digits will change accordingly. Unicast is set to the default value and Multicast can be selected in Unicast / Multicast. Multicast IP will be activated and its setup is available only when Multicast is selected from Multicast/Unicast. . Select a number from 224. 0. 0. 0 to 239. 255. 255. 255 for the D-Class IP address. TTL will be also activated and the value from 0 to 255 can be set only when Multicast is selected from Multicast / Unicast. The default value is 5. Note If you want to connect IP Router with the main body of SHR-2160/2162/2080/2082, you shall designate a port for SHR-2160/2162/2080/2082 in the IP Router setup menu. The main body of SHR-2160/2162/2080/2082 uses 4 ports for TCP communication. In addition, if you want to use the DHCP function backed by IP Router to allocate Dynamic IP to the main body of SHR-2160/2162/2080/2082, you shall designate a port for the IP which SHR-2160/2162/2080/2082 has been allocated by the IP Router setup menu. If you use IP Router, you are recommended to rather determine IP and Port numbers to be allocated to the main body of SHR-2160/2162/2080/2082 from the IP Router setup menu, set the connection mode to Static IP for the main body of SHR-2160/2162/2080/2082, and input the determined IP and Port number in IP Router than use the DHCP function. Please refer to the IP Router User's Manual or call the manufacturer to set up IP Router. English 5-30 SHR-2160/2162/2080/2082 USER'S MANUAL Callback Settings The Callback function is used to forward a callback message to the IP where SmartViewer is in action in case Alarm, Motion Detection, or Video Loss event occurs. On/Off : Off is default but you may choose On. IP Address : IP setting is available only when On is selected from On/off Setting. Select the IP address of PC where SmartViewer is in action. Port(UDP) : You may choose one from 7900 to 7999 and the number changes by 1. Selects the Port value for the Callback Connection menu from SmartViewer Setup. Retrial : You may choose one from 1 to 20 and the number changes by 1. Caution - Though Callback is set to ON, any Callback message will be created unless Alarm, Motion Detection, and Video Loss are set by EventRecord. - Unless the Callback button is clicked, SmartViewer does not receive any Callback message. 5-31 English 9 Network Setup Port Setup for SmartViewer Connection The Port value for DVR registration of SmartViewer (Setup Site Setup) shall be as same as that of the set (TCP). If you want to use the IP Router, you shall forward the activated Port depending on the current setting value. - If set to TCP, allocate 4 ports to the IP Router whose Port(TCP) was set. - If set to UDP, allocate 4 ports whose Port(TCP) was set and 160 ports whose Port(UDP) was set to the IP Router. In the event of TCP Setup from Transfer Protocol Setup Page The ports allocated to Port(TCP) will be used for SmartViewer connection control and stream forwarding. In the event of UDP Setup from Transfer Protocol Setup Page The ports allocated to Port(TCP) will be used for SmartViewer connection control and the ports allocated to Port(UDP) will be used for stream transfer. If you set to Multicast - Both MultiCast IP and TTL Setup will be activated. - MultiCast IP means the group address(D-Class IP Address : 224. 0. 0. 0 ~ 239. 255. 255. 255) for MultiCast Forwarding. - TTL(Time To Live) indicates how many Routers will be passed for MultiCast Forwarding. - When you are unable to use Multicast by the Network(LAN or ADSL) characteristic as both Set and SmartViewer are installed, the message, "Not Connected" will be displayed in the SmartViewer screen. [. . . ] SHR-2160/2162/2080/2082 DVR allows no more than 3 users' connection with Smart Viewer at a time. - Check the Network setup of SHR-2160/2162/2080/2082 DVR. - When you use DHCP/ADSL(PPPoE) for connection, please check if you get the right SHR-2160/2162/2080/2082 DVR MAC Address. - If SHR-2160/2162/2080/2082 DVR is connected to the ADSL network, please check if Bandwidth is set below 600 Kbps. [. . . ]