User manual SAMSUNG SHR-3010P

[. . . ] GB D F DIGITAL VIDEO RECORDER SHR-3010 User's Manual ES I CLASS A (For Business) To use this product safely, have to read "Important Safety Introductions", and then be well aware of the contents. GB DIGITAL VIDEO RECORDER GB Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1. 7. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. [. . . ] [5MINUTE/4MINUTE/3MINUTE/2MINUTE/1MINUTE/30SECOND/20SECOND/ 10SECOND/AUTO/OFF] 3-17 3-18 GB DIGITAL VIDEO RECORDER GB PRE ALARM TIME LIMIT The pre-alarm recording is an important function which enables you to find out about the situation immediately before a motion is detected in the input video or before alarm occurs. Set how much video data you want to record before the motion is detected or alarm is triggered. About 2 seconds to 10 seconds of video data are stored in the system's SDRAM at all times. When a motion is detected or alarm is triggered, as much data as it is set in the PRE ALARM TIME LIMIT is taken from the SDRAM and written to the HDD as it simultaneously begins the alarm recording. However, since the capacity of the SDRAM is limited, the field rate of the pre-alarm recording will decrease as the time set in the PRE ALARM TIME LIMIT is increased. [10SECOND/8SECOND/6SECOND/4SECOND/2SECOND/OFF] MOTION DETECTION The DVD will start recording images whenever it detects any movement only when ALARM ENABLE is set to ON. At this time, you can set the detailed items about the motion detection in the SET AREA & SENSITIVITY menu. To force stop the recording started by the motion detection, press and hold the STOP(s) button for 3 seconds. Then, the recording started by the motion detection will be paused for 5 seconds, during which time you should go into the menu and set the MOTION DETECTION to OFF to completely stop the recording. If no action is performed by the user for 5 seconds, the system resumes the recording started by motion detection. [ON/OFF] Caution If the system is currently recording, the PRE ALARM TIME LIMIT settings will not be applied even when alarm occurs. The PRE ALARM TIME LIMIT settings are applied only if the system is not currently recording. Caution When performing the recording started by motion detection, the recording time is determined by the the time set in MAIN ALARM TIME, PRE ALARM TIME LIMIT, and POST ALARM TIME LIMIT as it was the case in the alarm recording. POST ALARM TIME LIMIT Set the amount of video data you want to record immediately after a motion is detected in the input video or alarm is triggered. The system records as long as the time set in the MAIN ALARM TIME, and then records more data as long as the time set in the POST ALARM TIME LIMIT. [5MINUTE/4MINUTE/3MINUTE/2MINUTE/1MINUTE/30SECOND/20SECOND/ 10SECOND/OFF] SET AREA & SENSITIVITY 1) AREA Areas for motion detection are 4 in total and you can set the LEVEL, SIZE, and MOVE for each area. When you go into SET AREA & SENSITIVITY menu, the following screen appears and the cursor is positioned at the AREA item. At this time, press the UP( ) or DOWN( ) button to select the desired area (AREA 0 ~ AREA 3), and press the SET/STILL( ) button to move the cursor to the LEVEL item to set the sensitivity level for the selected area. [0/1/2/3] Note The following illustrates the temporal relationship among the main alarm recording time (MAIN ALARM TIME), pre-alarm recording time (PRE ALARM TIME LIMIT), and post alarm recording time (POST ALARM TIME LIMIT) based on the time of alarm occurrence. Alarm Occurrence PRE ALARM TIME LIMIT MAIN ALARM TIME POST ALARM TIME LIMIT AREA=0 LEVEL=OFF [SIZE][MOVE] AREA 0 AREA 1 AREA 2 AREA 3 MAIN ALARM PICTURE RATE Set the main alarm recording field rate. If the input video signal is NTSC, a maximum of 60 FPS can be recorded; if PAL, a maximum of 50 FPS can be recorded. 1) NTSC [60. 00FPS/30. 00FPS/15. 00FPS/10. 00FPS/7. 50FPS/5. 00FPS/ 2. 50FPS/ 1. 00FPS/0. 50FPS] 2) PAL [50. 00FPS/25. 00FPS/12. 50FPS/8. 30FPS/ 6. 25FPS/5. 00FPS/2. 50FPS/ 1. 00FPS/0. 50FPS] 2) LEVEL Sensitivity to motion can be set from LOW to HIGH+, or to OFF. Closer to HIGH, more resensitive to motion, closer to LOW, more insensitive to motion. Press the UP( ) or DOWN( ) buttion to set the sensitivity level, and press the SET/STILL( ) button to move the cursor to the SIZE item to set the size of the motion detection area. [OFF/LOW/LOW+/MIDDLE/MIDDLE+/HIGH/HIGH+] 3-19 3-20 GB DIGITAL VIDEO RECORDER GB 7 AREA=2 LEVEL=OFF [SIZE][MOVE] AREA 2 Reservation Record Setup The following illustrates the intial setting of the TIMER RECORD SETUP menu. TIMER RECORD SETUP TIMER DAY START OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-OFF --- --:-- 3) SIZE Set the size of the area currently selected. [. . . ] ­ To start recording while the DISK END MODE is set to STOP, you should set the CLEAR ALL DATA in SYSTEM SETUP menu to ON and terminate the menu. Then, all the current data will be deleted. Now, you should press the RECORD button( ) to start recording. However, as the deleted data can not be recovered by all means, you should check again before deleting. · No voice during play · After power supply, no further progress available after booting menu screen · No voice · The screen trembles vertically during play. · Interval between image and voice during play · Garbled screen during play · Unable to record. [. . . ]