User manual SAMSUNG SHR-3040

[. . . ] SHR-3040 4 Channel DVR User's Manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www. samsungsecurity. com overview KEY FEATURES Display · Real Time Display of Each Channel · Auto Sequence display of 4 channels · PIP (Picture in Picture) · Pause Mode · 2X ZOOM · Quick Switch between Live and Playback Screen · PTZ Camera supported Record · Up to 3 Levels of Quality and Frame Rates · Audio Recording · Scheduled Recording · Event Recording using External Sensors and Motion Detection · Emergency Recording Network · Remote Monitoring using Web Viewer · Supports DDNS Service Play · Search by the Data Size, and Date/Time · Play Speed Adjustment and Forward/Backward Playback · Event Search Data Storage · Simple, Easy Backup using USB Memory · Network Backup Others · UNI-CODE supported · Spot Monitor · Video Loss Detection 2_ overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. [. . . ] Can access menus of Client Setup, Player, and Remote Viewer using the Web Viewer. · USER PW: Provide the default password. · NEW PW/CONFIRM: Provide a new password. Provide a new password and select <ENTER> to apply the new password; if you enter an invalid password, an error message will appear. Your setting will be applied. Buzzer Setup You can set whether to use the buzzer sound. See the previous section to repeat steps 1~3. Use the up/down () button to select <BUZZER SETUP>, and press [OK]. The "BUZZER SETUP" screen appears. CONFIGURATION HDD MANAGEMENT CAMERA SETUP MOTION SETUP ALARM SETUP INTERVAL SETUP DATE/TIME SETUP PASSWORD SETUP BUZZER SETUP ESC 5. Use the up/down () button to move to a desired item. · KEY TONE: Set the key tone of the button. · VIDEO LOSS: Set to sound the buzzer if a video loss occurs. · ALARM ACTIVE: Set to sound the buzzer on a sensor signal input. · MOTION DETECT: Set to sound the buzzer when a motion is detected. If you select <DEFAULT>, the settings will be restored to the factory default. To return to the previous menu, select <ESC>. KEY TONE VIDEO LOSS ALARM ACTIVE MOTION DETECT BUZZER SETUP OFF OFF OFF OFF OK DEFAULT ESC English _35 setup EXTERNAL DEVICE You can configure the settings of Network, PTZ, Mouse, Audio, and Spot output. TCP/IP Setup You can view the Live screen, configure the DVR settings, and backup HDD data remotely via the network. IP Setup 1. Press the [MENU] button on the remote control or the front panel. The "DVR LOG-IN" dialog appears. Enter the password and select <ENTER>. The "MAIN MENU" screen appears. Use the up/down () button to select <EXTERNAL DEVICE>, and press [OK]. The "EXTERNAL DEVICE" screen appears. MAIN MENU DISPLAY SETUP RECORD CONFIGURATION EXTERNAL DEVICE BACK-UP FIRMWARE UPGRADE FACTORY DEFAULT LANGUAGE SHUTDOWN EXIT ENGLISH 4. Use the up/down () button to select <TCP/IP SETUP>, and press [OK]. [. . . ] Check the camera by replacing it with another one; replace if required. Check whether the Audio I/O volume is set too low; adjust the volume at your preference. Check whether the speakers are powered properly before turning on. Avoid other radio devices since the remote control may have frequency interference. [. . . ]