User manual SAMSUNG SHR-4040P

[. . . ] DIGITAL IMAGE RECORDER SHR-4040P User's Manual A Grade Device (for industrial purpose) - This device was registered for industrial use emitting less electromagnetic waves than regu lated. - You shall read through "Safety Warnings & Cautions" for the safe use of this product. DIGITAL IMAGE RECORDER Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1. 7. This symbol indicates high voltage is present inside. [. . . ] Here, you are in live mode. Caution Upon entering the DATE & TIME SEARCH menu, the current date and time will be displayed in the DATE and TIME item. Please type in a date and time as you wish for recorded data search. As the HDD contains no data on factory delivery, you will not be able to see the list though you enter the EVENT SEARCH menu 6-1 6-2 DIGITAL IMAGE RECORDER 3 EVENT Search If you press the search button and click EVENT SEARCH, the following screen will pop up. EVENT search is also available by pressing the ALARM button in live mode. EVENT SEARCH 94 2003-07-01 00:00:00 AI 1 95 2003-07-01 00:00:00 MD 2 If you press other camera button than selected during EVENT SEARCH, the following message will pop up. [Ex. ] If you press the CAMERA 2 button during (CAMERA 1 DATA) SEARCH after you select No. 900 file. MUMBER:95/95 :MOVE QUERY CAMERA 2 IS NOT AN EVENT-ASSOCIATED. :SELECT MENU:EXIT All the data recorded HDD by alarm or motion will be listed on the screen in the order of recording time. You shall also click QUERY for the detailed search of EVENT SEARCH DATA. Then, the following screen will pop up. Reference If the recorded data is too large to be listed in a page, you may select a list no. column with the LEFT( ) or RIGHT( ) button to see the data by pages LIST ALL TEXT notifies you of EVENT LOG DATA update. LIST ALL appears in the following cases. - In case an additional event occurs after you escape from the Event Search menu. - In case the user sees only the selected log of all logs in the process of Event Query EVENT SEARCH DATE/TIME PERIOD FROM 2003-07-01 TO 2003-07-01 CH A-IN M. D. 1 OFF OFF 2 OFF OFF 3 OFF OFF 4 OFF OFF :MOVE OFF 00:00:00 00:00:00 :SELECT MENU:EXIT Reference Access to the search menu will be denied as far as the user stays in the menu. You shall escape from the menu first to access the search menu. 6-3 6-4 DIGITAL IMAGE RECORDER 4 Basic Replay If you want to replay the HDD data rightly, press the PLAY/STILL button( ¤II ) button. Then, the PLAY/STILL button( ¤II ) will be turned on and the HDD data will be replayed from the first part after the following screen appears. 2003-07-01 00:00:01 Reference If you press Playback in the Simplex recording mode, the following message will pop up. CAM 1 CAM 2 RECORDING WILL BE STOPPED DURING PLAYBACK IN SIMPLEX MODE CONTINUE? CAM 3 CAM 4 YES NO If no data has been recorded, the "No Recorded Data" message will be displayed. If you press Playback in the Record Lock mode, the following message will pop up. NO RECORDED DATA PLAYBACK OPERATION IS NOT AVAILABLE DURING RECORD LOCK STATUS IN SIMPLEX MODE . . . . Reference - The system can perform replay in a live screen or PLAYBACK STILL condition. - As replay is not available though you press PLAY button( ¤II ) while you stay in the menu, you shall get out of the menu first. - Channel conversion is not allowed in PLAY mode. You shall enter STILL mode for channel conversion. - Video recording speed reaches 25. 0 IPS in the SIMPLEX mode while it decreases by half in the DUPLEX mode. You shall press the STOP button( s ) to pause replay. If you press the PB/STILL button( ¤II ) again, the system will replay from the point where replay was paused previously. [. . . ] The user can electronically pan and tilt within the enlarged image by dragging the image using a mouse. NOTE Zoom In/Out works only in the single-screen mode. ¤Brightness Changes the brightness of the current image using a control slider. NOTE Brightness works only in the single-screen mode. Go To Date/Time Goes to the specific dates and times directly using the Go To dialog box. 13-11 XIV. AppendixSmart Viewer 14 SHR SMART VIEWER You do not need to install any special software on you personal computer to review the video saved as MiniBank. The backup file contains the Smart Viewer program. [. . . ]