User manual SAMSUNG SHR-6162P

[. . . ] SHR-6080/6082/6160/6162/6163/6164 8 Channel/16 Channel DVR User's Manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www. samsungsecurity. com overview FEATURES This DVR (Digital Video Recorder) employs MPEG-4 video encoding for 8 or 16 channels of camera input and G. 723 audio encoding for 4 channels, and supports simultaneous hard disc recording and playback. And also it supports network connectivity, providing remote monitoring from a remote PC by transferring video and audio data. · Provides convenient User Interface · 8/16 CH Composite Input Connectors · Supports CIF(S)/Half D1(M)/Full D1(L) recording formats · With the network specific codec, network transfer enabled regardless of the recording conditions · De-interlacing processor for better picture quality · Display of HDD information and status by using HDD SMART · CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 240 (NTSC)/200 (PAL) IPS speed (SHR-6163/6164) · CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 120 (NTSC)/100 (PAL) IPS speed (SHR-6080/6082/ 6160/6162) · 8/16-channel Loop Through Video port connection · Hard Disk overwrite function · Mass storage hard disk backup through high-speed USB 2. 0 · Backup function using USB 2. 0 flash memory and external CD/DVD writer (Internal DVD writer is not available for SHR-6080/6160/6163) · Simultaneous Record and Playback of 8/16-channel video data · Various Search Modes (Search By Time, Event, Backup, POS and Motion Detection) · Various Recording Modes (Time Lapse, Event, Scheduled Recording) · Extended Hard Disk Connection (USB 2. 0) · Alarm Interface (Input: 8/16, Output: 4, Reset: 1) · Remote Monitoring function by Windows Network Viewer (NET-i Pro/Web viewer) 2_ overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. [. . . ] · Record Quality : Sets the recording quality. When the Event recording setup is done, press <OK>. Record Option You can set the recording to stop or overwrite when the HDD is full. Using the mouse may help easy setup. 3. Use the up/down buttons () in <Record> window to move to <Record Option>, and press [ENTER] button. Use direction buttons ( ) to move to a desired item, and set the value. Record Option Disk End Mode Overwrite Disk End Beep Auto Delete 99 day OK Cancel 52_ using the DVR · Disk End Mode : If selected <Overwrite>, recording will continue despite the HDD full while overwriting the oldest. If selected <Stop>, the recording will stop when the HDD is full. · Disk End Beep : If selected <Stop>, the button is activated. If you check it, the beep will sound on the disk full and the recording stops. · Auto Delete : If you check it, Record Period setup is activated. If you setup the auto delete, recorded data only in the configured period are searchable. When the recording option setup is done, press <OK>. USING THE DVR SETTING THE EVENT You can set recording options for sensor, motion, and video loss event. Sensor Detection You can set the sensor's operating condition and connected camera, as well as alarm output and its duration. Using the mouse may help easy setup. 1. Press the [MENU] button on the remote control or front panel. Use the left/right button ( ) to select <Event>. Event setting menu is selected. Event Sensor Detection Motion Detection Video Loss Detection Alarm Schedule Logout Exit 3. Use the up/down buttons () to move to <Sensor Detection>, and press [ENTER] button. A window of sensor detection setup appears. Use direction buttons ( ) to move to a desired item, and set the value. · Sensor Operation : Sets the operation mode of sensors. - <OFF> : Sensor does not operate. - <N. O (Normal Open)> : Sensor is opened. If the sensor is closed, it generates alarm. - <N. C (Normal Close)> : Sensor is closed. If the sensor is open by interruption, it generates alarm. [. . . ] 3) To release the event : Event Record Mode - Alarm (Motion Detection/ Video Loss) ­ set the mode to Off. Menu Camera Check if the current protocols and other settings in the PTZ device are properly configured according to the PTZ camera. It takes time for the DVR to recognize multiple external HDDs. Try again in a moment and if the problem (of failure to recognize as many HDDs as connected) persists, it may occur due to a mechanical error of the HDD installed. [. . . ]