User manual SAMSUNG SL-M2026W/SEE

[. . . ] User’s Guide BASIC BASIC This guide provides information concerning installation, basic operation and troubleshooting on windows. ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC Storing the toner cartridge 41 43 44 46 50 1. Introduction Key benefits Features by models Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 4 6 8 9 10 16 19 21 22 24 Redistributing toner Replacing the toner cartridge Cleaning the machine Tips for moving & storing your machine 4. Troubleshooting Tips for avoiding paper jams Clearing paper jams Understanding the status LED 52 53 56 5. [. . . ] • Network Password: Enter the encryption network password value. • Confirm Network Password: Confirm the encryption network password value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security setting. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. 2. Using a Network-connected Machine 113 Wireless network setup 12 The window showing the wireless network settings appears. Check the settings and click Next. - Subnet Mask: 255. 255. 0. 0 (Use the computer’s subnet mask. ) - Gateway: 169. 254. 133. 1 Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network information is shown as follows: - IP address: 169. 254. 133. 42 - Subnet Mask: 255. 255. 0. 0 Then, the machine’s network information should be as shown below: - IP address: 169. 254. 133. 43 13 When the window that tells you that the network cable connection is confirmed appears, disconnect the network cable and click Next. . If the network cable is connected, it may have trouble finding the machine when configuring the wireless network. 14 15 The wireless network connects according to the network configuration. After installation is finished, click Quit. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installation for Mac" on page 84). 2. Using a Network-connected Machine 114 Wireless network setup 10 11 Turning the Wi-Fi network on/off Setting the Wi-Fi Direct for mobile printing Wi-Fi Direct is an easy-to-setup peer-to-peer connecting between method for your between a printer and mobile device that supports Wi-Fi Direct that provides a secure connection and better throughput than ad hoc mode. With Wi-Fi Direct, you can connect your printer to a Wi-Fi Direct network while concurrently connecting to an access point, You can also use a wired network and a Wi-Fi Direct network simultaneously so multiple users can access and print documents both from Wi-Fi Direct and from a wired network. 1 2 Check whether the network cable is connected to the machine. If not, connect the machine with a standard network cable. [. . . ] It is a client-server protocol, where the client transmits an email message to the server. Transmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions. TIFF Tagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. [. . . ]