User manual SAMSUNG SL-M2835DW

[. . . ] User’s Guide BASIC BASIC This guide provides information concerning the installation, basic operation and troubleshooting on Windows. ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC Available consumables 44 45 46 48 50 53 54 58 1. Introduction Key benefits Features by models Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 4 6 8 9 10 15 18 20 21 23 Available maintenance parts Storing the toner cartridge Redistributing toner Replacing the toner cartridge Replacing the imaging unit Cleaning the machine Tips for moving & storing your machine 4. Troubleshooting Tips for avoiding paper jams Clearing paper jams Understanding the LED 60 61 69 2. [. . . ] • Confirm Network Password: Confirm the encryption network password value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security enabled. Select Open System or Shared Key for the authentication and click Next. • WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network information is as shown follows: - IP address: 169. 254. 133. 42 - Subnet Mask: 255. 255. 0. 0 Then, the machine’s network information should be as below: - IP address: 169. 254. 133. 43 - Subnet Mask: 255. 255. 0. 0 (Use the computer’s subnet mask. ) - Gateway: 169. 254. 133. 1 8 The window showing the wireless network setting appears. Check the settings and click Next. 2. Using a Network-Connected Machine 132 Wireless network setup 9 10 11 15 The Wireless Network Setting Complete window appears. When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Follow the instructions in the installation window. 1 2 Make sure that the machine is connected to your computer and powered on. Insert the supplied software CD into your CD-ROM drive. Setup using Mac Access point via USB cable Items to prepare • • • • • Access point Network-connected printer Software CD that was provided with your machine A machine installed with a wireless network interface USB cable 3 4 5 6 7 8 9 Double-click the CD-ROM icon that appears on your Mac desktop. • For Mac OS X 10. 8, double-click the CD-ROM that appears on Finder. Double-click the MAC_Installer folder > Installer OS X icon. Read the license agreement and click Continue. [. . . ] It is a client-server protocol, where the client transmits an email message to the server. Transmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions. TIFF Tagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. [. . . ]