User manual SAMSUNG SLATE-PC-700T1A-H02FR

[. . . ] > Shut down mode to shutdown the 1 2 Entering Sleep mode When the computer is turned on, press the computer’s power button once briefly. To wake the computer up, briefl y press the Power button of the computer again. Using the Touch Logon Using the Touch Logon program, you can easily log on using your fingers. Getting Started 8 Configuring the Touch Logon program To use the Touch Logon function, you have to setup the Touch Logon function in the Windows Logon screen. 3 Choose the Touch Logon background screen. Select a background screen by touching it and touch Next. 1 2 Click Start > All Programs > Samsung > Touch Logon > Touch Logon Options. Select Use Touch Logon. z x If you haven’t set a Windows password, the Touch Logon settings are finished at this stage. [. . . ] You can configure whether to use the Airplane mode and Wi-Fi options. You can configure external display devices, and the screen brightness/color. Power Wireless Network Advanced Settings screen for each functions Display Desktop Background You can configure the Desktop background and the screen saver. / Screen Saver Sound Alive You can configure the sound mode (Music, Movie, Speech, Silver Mode etc. ). Using the Touch Feature 15 Using the Touch Feature Using the Basic Gestures Using the Applied Gestures Screen Calibration Entering Letters Using the Touch Screen Using the Touch Launcher Using the Touch Supporter Using the digitizer pen Using the Basic Gestures Learning basic touch screen operations Touch Operation Single-tap (click) Function Using the Touch Feature 16 To select an item, tap over the item with your finger. This is the same as leftclicking once with a mouse. Double-tap (double-click) To run an item, quickly tap the item twice with your finger. This is the same as double-clicking once. Moving (drag) To drag an item, place your finger over the item and drag it to the new location. This is the same as dragging using a mouse. Press and take off (mouse right-click) Tapping two fingers in succession (mouse right-click) Moving finger (scroll) If you press and hold the screen for approximately 3 seconds, the pop-up menu appears. This is the same as right-clicking with the mouse. Tap with one finger and then tap with another finger while holding down the first finger. This is equivalent to right-clicking a mouse. Move your finger up and down, left or right to move on the screen accordingly. This is the scroll function of the mouse. This operation may perform a different function depending on the application program. Using the Applied Gestures Touch Operation Drag two fingers apart / together (zoom-in/zoom-out) Flick one finger fast (page move) Function Using the Touch Feature 17 Drag apart or together two fingers to zoom-in or -out of a picture or image. Flick one finger quickly to the left or right in order to move to the previous or next page. By quickly drawing a line from top to bottom with two fingers, the Touch Launcher program is launched. Quickly draw with two fingers (this runs the Touch Launcher) Tapping three fingers (Launching the Touch Supporter) Tapping five fingers (Launching the keyboard program) Learning about touch operations Tapping three fingers simultaneously launches the touch supporter program. Tapping fi ve fingers simultaneously launches the keyboard program. Select Start > Control Panel > Hardware and Sound > Pen and Touch > Flicks tab and select Practice using flicks to learn about the various touch operations. Screen Calibration Using the Touch Feature 18 When you use the touch screen for the fi rst time or the pointer on the screen does not precisely match the points you touch, calibrate the touch screen using the Tablet PC Settings menu. Screen Calibration The calibration process for the touch screen may differ depending on the operating system and may not be available in some operating systems. The following descriptions assume the Windows 7 operating system. 2 Select the screen type to calibrate. If the Calibration screen appears, touch the point represented by the “+” mark and then remove your finger. The “+” mark appears sequentially from the top left to the bottom right of the screen. 1 Click Start > Control Panel > Hardware and Sound > Tablet PC Settings > Display > Calibrate. 3 When the Do you want to save the calibration data?The touch screen input points are calibrated. Entering Letters Using the Touch Screen You can enter letters using either the Tablet PC input panel. Using the Touch Feature 19 Launching the Tablet PC Input Panel If you touch the touch screen with your finger, the Tablet PC Input Panel appears with the cursor at the bottom left on the Desktop. tab If you touch the Tablet PC Input Panel tab, the Tablet PC Input Panel appears. Let’s learn how to enter letters in Notepad. 1 2 3 Launching Notepad. If you touch the Notepad screen with your finger, the appears on the Notepad with the cursor. If you touch the Panel appears. Writing Pad Mode Touch keyboard Tools Close Are you unable to find the Tablet PC Input Panel tab ?To edit program icons Using the Touch Feature 23 2 If the program icon changes to Edit mode the new location. , move the icon to 1 Touch the Edit mode icon. 3 To exit Edit mode, touch the Edit mode icon again. Using the Touch Supporter This program helps you to use functions that cannot be easily used with touch operations more easily. Using the Touch Feature 24 Using the Touch Supporter If you touch the screen with three fingers simultaneously the touch support program is launched. Ctrl Ctrl+X Del Magnifier Settings Using the Numeric Keypad The Numeric Keypad is to use numeric and direction keys only. 1 Touch the Numeric Keypad on the screen. . The Numeric Keypad appears 2 Show/Hide Hotkeys Ctrl+C Ctrl+V Ctrl+Z Numeric Keypad If you touch the buttons on the Numeric Keypad, the corresponding number or symbol is entered on the screen. To exit the Touch Supporter, click fingers again. or touch the screen with three Switches the mode between the numeric and the direction key input modes What does the Ctrl key do (multiple selection mode)?The icon performs the same function as the Ctrl key on the keyboard. [. . . ] Installing and separating the Slate PC Dock after turning the computer off is recommended. 2 Align the computer connector of the Slate PC Dock and the Slate PC Dock port at the bottom of the computer and connect them. Installing the Slate PC onto the Dock 1 Insert your fi nger into the groove on the side of the Slate PC Dock to open the top cover of the Slate PC Dock. Computer Connector Using the Slate PC Dock Ports Provided by the Dock The back of the Dock Using the Slate PC 35 Connecting headphones to the Dock Using the Headphone jack 1 1 2 3 4 5 Right-click over the Volume Control icon in the notification area at the bottom right of the Desktop and select Playback Devices. (Alternatively, click the Control Panel > Hardware and Sound > Sound > Playback tab. ) 1 2 DC Jack Wired LAN Port Digital Video/ Audio Port (HDMI) A jack to connect the AC adapter that supplies power to the computer. Connect the Ethernet cable to this port. You can connect an HDMI cable to this port. [. . . ]