User manual SAMSUNG SLC410W

[. . . ] Some features may not be available depending on models or countries. bASIC Available supplies 40 42 43 45 47 49 51 53 55 1. Introduction Key benefits Features by models Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 4 6 9 10 11 17 20 21 22 23 Available maintenance parts Storing the toner cartridge Redistributing toner Replacing the toner cartridge Replacing the waste toner container Replacing the imaging unit Cleaning the machine Tips for moving & storing your machine 4. Troubleshooting Tips for avoiding paper jams Clearing paper jams Understanding the status LED 57 58 62 2. [. . . ] see "Setting IP address" on page 96. 1 2 Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable. Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window. For example, Configuring the machine’s wireless network Before starting you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. To configure wireless parameters, you can use SyncThru™ Web Service. 3 4 Click Login on the upper right of the SyncThru™ Web Service website. If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. We recommend you to change the default password for security reasons. € • ID: admin Password: sec00000 Using SyncThru™ Web Service Before starting wireless parameter configuration, check the cable connection status. 5 6 When the SyncThru™ Web Service window opens, click Network Settings. Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. Using a network-connected machine 131 Wireless network setup 7 Select the one Network Name(SSID) in the list. € SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment. Infrastructure: Allows wireless devices to communicate with each other through an access point. If your machine has a display, you can also turn on/off the Wi-Fi from the machine’s control panel using the Network menu. If your network’s Operation Mode is Infrastructure, select the SSID of the access point. [. . . ] glossary 227 Glossary TWAIN An industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program. it is an image capture API for Microsoft Windows and Apple Mac operating systems. Watermark A watermark is a recognizable image or pattern in paper that appears lighter when viewed by transmitted light. [. . . ]