User manual SAMSUNG SM-316B

[. . . ] If you make any adjustments or perform any operations other than those specified in this guide, you run the risk of exposure to hazardous radiation. Avoid exposing your eyes or skin to direct or scattered radiation. WARRANTY PRECAUTIONS Please refer to the Samsung limited warranty statements. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Always check each disc for cracks before using it. [. . . ] 2 Follow the instructions displayed on the screen to install the utility. Refer to the separate utility documentation for further details. 3 Store the utility disc in a safe place. CS : Cable Select(CSEL) SL : Slave MA : Master Installing the Device Driver No additional device driver is needed for Windows 95/98/2000/ME/XP/NT4. 0, as the default Windows device driver is used. You can check that the COMBO drive has been correctly detected by Windows. To do so, proceed as follows. 4 Connecting the audio cable from a sound card Connect the 4-pin audio cable between the sound output terminal on the COMBO drive and the audio input terminal on the sound card. For clearer sound, use a digital output terminal. (Available only for the CAID that supports digital output) This may not be available for general sound cards. Sound Card Digital Output Terminal 1 Double-click on the My Computer icon on your desktop. 2 Double-click on the Control Panel folder. 5 Expand the CD-ROM branch. The SAMSUNG COMBO SM - *** device name is displayed. The SAMSUNG device driver enables discs in the COMBO drive to be read but not recorded in an MS-DOS environment; the driver is located in the D driver folder on the CD record utility disc. Sound Output Terminal Audio Input Terminal of the Sound Card 8 9 ENGLISH Setting Up the Device Driver x Automatic Using the COMBO Drive To play audio or video CDs and / or DVDs in your COMBO drive, proceed as follows. Setup 1 Insert the setup diskette in the diskette drive and change the directory to A:, where A: is the diskette drive. To do so, type A: after the C:\ prompt and press [Enter]. 1 Push the power button and boot the computer. 2 After booting the computer, open the disc compartment by pressing the Eject button. disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on. 2 Type CDSETUP and press [Enter]. 3 Reboot the computer. 3 Insert the disc (CD/DVD) with the label on the 4 Play the disc (CD/DVD). Playing Audio CDs x Manual Setup Run the CD player supplied with Windows or your sound card. You can listen to the CD by connecting an earphone to the earphone connection terminal. 1 Make the C:\SAMSUNG directory. 2 Copy the files from the diskette to the C:\SAMSUNG directory. To do so, type COPY A: * . * C:\SAMSUNG after the C:\prompt and press [Enter]. Playing DVDs or Video CDs Set up and run the SOFT MPEG program supplied as an accessory. 3 Edit the CONFIG. SYS file. Add the DEVICE=C:\SAMSUNG\SSCDROM. SYS \D:SSCD000/V entry. LAST DRIVE = Z ----------------------------------------------------------------------DEVICE = C :\SAMSUNG\SSCDROM. SYS/D : SSCD000/V Storing and Cleaning Your Discs To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs. 4 Edit the AUTOEXEC. BAT file. Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry. ----------------------------------------------------------------------C :\SAMSUNG\MSCDEX /D:SSCD000 1 Do not place a disc in direct sunlight. 2 Store a disc vertically in a well-ventilated and stable location. 3 Do not write or attach a label on a disc. 4 Do not drop a disc or place heavy objects on it. 5 Do not touch the surface of a disc; hold it by the edges. 5 Reboot the computer. 6 To clean a disc, polish lightly from the inside 7 Do not leave the disc compartment open when you are not using it. of the disc to the outside with a soft cotton cloth. 10 11 ENGLISH Solving Recording Problems If you have any problems recording via your COMBO drive, follow the appropriate instructions below for the source that you are using. x Hard Drive x CD-ROM Drive 1 Check whether the source file is corrupted. 2 Optimize the hard disk by using the Windows defragmenter feature: START / PROGRAMS / ACCESSORIES / SYSTEM TOOLS / DISC DEFRAGMENTER 1 Clean the source CD, if necessary. 2 Create an image file and then copy the image file to the COMBO drive. 3 Check the CD-ROM drive record speed. There are two recording methods : Low-speed (file by file) High-speed (transfer of an image file from the hard disk) 3 Decompress the hard disk if it is compressed. [. . . ] If you select DIGITAL at CD Audio Play in Media Player of Windows ME/XP, the earphone does not appear in the Digital Mode. The COMBO drive is not detected after it is connected to a sound card. The COMBO drive is not detected by Windows. No sound is heard from an audio CD. The interface mode of the sound card is AT-BUS. You must therefore connect the COMBO drive to the IDE port on the PC mother board, rather than to the sound card, or install an E-IDE compatible sound card. A CD is not read or is read too slowly. The disc compartment will not open. Check whether the CD is of good quality and clean it, if necessary. [. . . ]