User manual SAMSUNG SMT-170MP

[. . . ] This monitor should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or Samsung's in structions have been adhered to. 10. Installation: Do not install near any heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 11. PowerSources: This monitor should be operated only from the type of power source indicated on the making label. If you are not sure of the type of power supply to your installation site, consult your Samsung dealer or local power company. [. . . ] VGA VGA signal input LeftSideView AUDIO-B Audio-B input : Right (RED), Left (White) AUDIO-A/S-VIDEO Audio-A (S-Video) input : Right (RED), Left (White) -6- USER'S MANUAL RemoteController POWER Turns the Power On or Off. There will be a few seconds delay before display appears. Numberbutton Changes the SYSTEM ID for remote controller. With the SYSTEM ID button pressed, entered the desired NUMBER by pressing the corresponding button(0~9) to set up the Remote Controller ID IDRESET Resets 01(default value) for the remote control ID. MUTE Press to mute the sound temporarily. Displayed on the bottom left of the screen. Press the MUTE button again to cancel the Mute function. Alternatively press the - or + button to cancel the Mute function. UNDERSCAN Displays the entire video signal on the screen. MENU Open the on-screen menu and exit from the menu screen or close screen adjustment menu. ENTER Activates a highlighted menu item. SYSTEMID Setting the SYSTEM ID of remote controller. Press the MENU or button repeatedly to exit. PIPOFF(VGAmodeonly) PIP ---CAMERA DVR VCR DVD Cable STB AV Receiver DVD Receiver Move Enter Return PIP Source Size Position : Off : S-video : : 1. Press the / and ENTER button to select the Edit menu. Press the / and ENTER button to select input. Press the / and ENTER button to select the Name you want. Press the MENU or button repeatedly to exit. Move Enter Return - 10 - USER'S MANUAL B. PictureMenu Videomode Mode:Dynamic, Standard, Movie, Custom VGAmode:Contrast, Brightness Contrast Brightness Custom 81 100 Custom Mode Custom Color Tone Size Under Scan : Movie : Warm : 4:3 : Under Picture Move Enter Return <VGA mode> 1. Press the MENU and / button to select the Picture menu. Press the ENTER or button to select the Custom menu. (Press / button to select the custom - Video mode) 3. Press the ENTER or button to see the sub menu. Press the / and ENTER button to select the setting you want. [. . . ] Press the MENU or button repeatedly to exit. Move Enter Return 1. Press the MENU and / button to select the Sound menu. Press the ENTER or button to select the Mode. Press the / and ENTER button to select the setting you want. [. . . ]