User manual SAMSUNG SMT-190DN

[. . . ] Follow Instructions : All operating and user instructions should be followed. Cleaning : Unplug this monitor from the wall outlet before cleaning. A monitor that is meant for uninterruptedserviceandthatforsomespecific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose may exclude the reference to unplugging the monitor in the cleaning description otherwise required in Item 5. Attachments : Do not use attachments not recommended by Samsung as they may cause hazards. [. . . ] LANGUAGE Many language are provided and select a your language. DHCP User - Constituted by Dynamic IP on the cable/xDSL modem network You can use the SMT-190DN products through the network using Dynamic IP on cable/xDSL modem. In this case, it should be connected with DDNS to supporttheDynamicIP. Incaseofaconfigurationusing DHCP, as the connection to SMT-190DN is made using domain names (EX : http://wff0000. Net) that are automatically registered in our DDNS server, IP address, Subnet Mask and Gateway that are in the network tab of Admin Mode are not to be changed. The proper domain names of SMT-190DN are automatically registered to DDNS server installed in our company in case of modem connection. This section of the manual is intended for users who will install this security system in a network environment. Setting method: Move to, NETWORK SETUP MENU by using /KEY in the SETUP MENU, then press the ENTER SWITCH to displaytheOSDasshowninthefigurebelow. MOVE TO EACH item by using / KEY, and using / KEY to change the set value. static IP User - Constituted by Static IP on the TCP/IP network 1) Move to `STATIC. ' by using / KEY at NETWORK ACCESS, then press ENTER SWITCH to set ) After setting, move to the main screen by using the MENU button. ) After setting, move to the main screen by using the MENU button. Note HTTP Port Set the port to be used when connecting to SMT-190DN in Internet Explorer and receive the necessary files for image transmission. 5) You can view the video source of the SMT-190DN from a remote location PC. 6) Open your Internet Explorer web browser, type in the following in the URL window and press Enter. Net Where ff0000 is the MAC address of your SMT-190DN in this example. If your SMT-190DN MAC address is ff0001, then type in ff0001 instead of ff0000. Locate the MAC Address of the SMT-190DN (each SMT-190DN has its own unique MAC address) It can be checked in "5-9) NETWORK SETUP" of SETUP MENU'. However, if the IP Router is used in a network environment, input proper values with reference to the IP Router manual. If the SMT-190DN is using a Router, you may also connect remotely by typing In the WAN IP Address of the Router and the HTTP port assigned to the SMT-190DN. (here you must type in the port address even if it is the default "80"), such as http://192. ' by using / KEY in NETWORK ACCESS, then press ENTERSWITCH to set to DHCP. [. . . ] Write down the WAN Port IP Subnet Mask number and the LAN Port IP Address number. You will need it later when setting up the SMT-190DN. Port forwarding (HTTP) Click "Add Custom Service" Service Name : Set this to "HTTP" # Start Port and End Port : Set both to "From 10 to 6555" Server IP Address : SETUP MENU -> 5-9) NETWORK SETUP-> Check IP from network status to apply it identically to Private IP after DHCP setup. (Eng- Setup) It is not in use by any other device connected to the IP Router including the Local PC. [. . . ]