User manual SAMSUNG SNC-B2335P

[. . . ] SNC-B2335(P) Network Camera User Manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website www. samsungsecurity. com RoHS compliant Our product complies with "The Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment", and we do not use the 6 hazardous materials- Cadmium (Cd), Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr+6), Poly Brominated Biphenyls (PBBs), Poly Brominated Diphenyl Ethers (PBDEs)- in our products. overview CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. [. . . ] - Only scheduled time : Activates notification as configured only when alarm events occurred during the specified time period. Action : You can set an action to execute when an alarm occurs. - Alarm output : Set the alarm output port to which the alarm signal is transferred. - Output duration : Set the period of time to output the alarm signal to the specified alarm output port when an alarm occurs. If a new alarm event is detected during the alarm output, the delay time is recalculated based on the detection time of the recent alarm. - Alarm image transfer : If you select <On>, you can transfer JPEG images to a registered address via FTP or SMTP server or save images into the SD memory card according to the setting in <Event> - <Transfer setup>. 62_ setup screen To Set Intelligent Video Analysis 1. Click <Event> - <Intelligent video analysis>. The Intelligent Video Analysis screen appears. IV analysis function : Activated if <Enable> is selected, deactivated if <Disable> is selected. SETUP SCREEN J M If camera is capturing a close object, the video analysis capability may degrade. In the following cases, the video analysis function may not produce proper result on configured event and motion detections. - The subject color or brightness is similar to the background - Multiple random movement continues due to scene change or other reasons. - When object that is fixed continues to move in the same position. - 2 or more objects overlaps or 1 object splits into multiple objects. - Too fast object (for detection, one object should be found overlapping between contiguous frames). - Reflection / blur / shadow due to direct sunlight, illumination, or headlamp - In severe snow, rain, wind or in dawn / dusk - Moving object approaches to the camera too close Overlay : If <Enable> is selected, configured event rules and motion frame are displayed on the Live screen. Selecting <Disable> will not display overlay information. M Motion frame is displayed in two types on the Live screen. Green frame ­ indicates the moving object Red frame ­ Temporarily displays the moving object detected by the configured event rules. Sensitivity : Sets the sensitivity of the intelligent video analysis. - Sensitivity : Select the sensitivity among <Very high>, <High>, <Normal>, <Low>, and <Very low>. When selected with <Very high>, the intelligent video analysis functions on the smallest motion detection. English _63 setup screen Set rules You can set the event rules. - Virtual line based rules : You can configure event rules for up to 3 virtual lines. <Event Types> Pass : Event is generated if a moving object crosses the virtual line in the specified direction ( , , ) - Defined area based rules : You can configure event rules for up to 3 userdefined areas. <Event Types> Entering : Event is generated if a moving object enters the defined area from outside to inside. Exiting : Event is generated if a moving object exits the defined area from inside to outside. Appearing : An object that has not been existed in the area until the previous frame suddenly appears inside the configured area, not passing the border Disappearing : An object that has been existed in the area until the previous frame suddenly disappears, not passing the border. [. . . ] Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must This product includes cryptographic software written by Eric Young (eay@ cryptsoft. com). This product includes software written by Tim Hudson (tjh@cryptsoft. com). and/or other materials provided with the distribution. [. . . ]