User manual SAMSUNG SNC-L200

[. . . ] Safety instructions and precautions are designed to protect users and prevent any property damage. Please read and observe these instructions thoroughly before using the Netcam. Netcam(W) SNC-L200(W) User's manual NET WO RK SNC CAMER -L20 A 0 AB68-000524B(01) Netcam(W)_SNC-L200(W) Netcam(W)_SNC-L200(W) Safety Precautions Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is presentinside. It is dangerous to make any kind of contact with any inside part of this product. [. . . ] 39 Netcam(W)_SNC-L200(W) Netcam(W)_SNC-L200(W) Access to the Netcam(W) Website Installing the ActiveX Control A security warning window may appear when you access the Netcam(W) Website for the first time. In this case, you must install the Active Control program to view video from the Smart Viewer. For Static IP Users For Windows 2000/Windows XP Click the "Yes" Button when the following security warning window appears. 1 Run Internet Explorer. 2 Enter "http: //Private_IP address: port number" in the URL, and press the Enter Button on the keyboard. - The Smart Viewer Screen appears. - Ex)http://168. 219. 13. 197:8080 3 Enter the user name and password, and click the "OK" button. - Enter the new password when you have changed the user password from <Smart>to <Admin. (Default settings:ID -root, Password -root) Click 40 41 Netcam(W)_SNC-L200(W) Netcam(W)_SNC-L200(W) Installing the ActiveX Control A security warning window may appear when you access the Netcam(W) Website for the first time. In this case, you must install the Active Control program to view video from the Smart Viewer. For Windows XP Service Pack 2 1 Click the Installation Message when the following security warning window appears. Manually Installing the Activex Control 1 Click the Smart Viewer For Network Camera. Click 2 Click the ActiveX Control Install. Click 2 Click the Down Load Button. 3 Click the Execute Button. Click 3 Click the Install Button when a security warning window appears. Click Click 4 Click the Install Button. Note The download time for the ActiveX Control program may vary depending on the network environment. Click Click 42 43 Netcam(W)_SNC-L200(W) Netcam(W)_SNC-L200(W) Using the Smart Viewer You can use a variety of features such as video monitoring, record, capture and playback with the Smart Viewer. Smart Viewer Screen 2 1 3 4 6. Preset Operation Button: Move when the lens relocates to the Preset direction. Preset Delete Button: Delete the stored Preset settings. Preset Store Button: Store the Preset settings. Lens Direction Button (Pan &Tilt): Move the lens freely with 8 direction buttons. Locate the lens to the center position by clicking the central button. Flash Button: Turn on flash (turned on for 5 seconds and off for 30 seconds) 9. PIR Button: Enable or disenable Passive Infrared (PIR)functions. Storage Route Button: Change the storage route of record files. Capture Button: Capture selected images in JPEG files. Record Button: Record Video. 5 6 7 8 9 10 11 13. Playback Button: Play back recorded files. Screen Size Button: Adjust the image screen to desired size. 15 Power Pan &Tilt When you select a desired spot by clicking, the camera lens moves the spot to the center of the screen. 12 13 14 1. ActiveX Control Download: Click when installing the ActiveX Control program manually. Smart Viewer Tab: You can video-monitor. [. . . ] Full Screen View Button: Play back images in full monitor screen. Press the Esc 1 2 Button to cancel the Full Screen View. 2 3 4 Open File Button: Open files to be played back. Snapshot Button: Capture playback images. Event Log Button: Check all the information and status on the MultiViewer. 3 Reverse Playback Button: Reverse-play back video. [. . . ]