User manual SAMSUNG SNT-1010P

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plus. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] However, characters such as #, ', ", : cannot be used. Displays "NETWORK CAMERA. " However, only reading is available. Shows System and Web program version of Netcam. Full Access Any one can view images by connecting to Smart Viewer without going through the authentication process. You cannot control Camera's basic operations when it is connected in Full Access. When a regular user tries to connect to Smart Viewer, he/she will be connected through the authentication process. You may configure frame per second for image transfer as 1fps/2fps/5fps/10fps/15fps/30fps/. 15fps When the image size is below 320*240: Max. Password Maximum Frame Rate 5. 1. 4 User Registration Administrator's ID Old Password New Password Confirm Password Administrator's ID is always "root. " Password at initialization is "root. " Enter the password you want to change. Password can be a combination of numbers and letters up to 4~20 characters. Enter the password you want to change one more time. Please ask your network administrator and enter the following setup information correctly. To apply the settings to Netcam, you must click "Apply" button. Sender (E-mail) E-mail address 1~4 Image Count Assuming the sender's Email Address is "inyoung. heo@samsung. com, " and the Password is "1234567, " the "Alarm Notification" should be configured as follows. Network Configuration PPPoE(ADSL) Network Ports View Network Status Network Status Notification DDNS Configuration This is the menu to set "Static IP" or "DHCP. " This is the menu to set PPPoE (ADSL). This is the menu to set "HTTP Port. " This is the menu to view current system network status. This is the menu used to notify the information of IP Address that is dynamically allocated, such as DHCP or PPPoE. This is the menu used to set DDNS. 36 Video Netcam | SNC-L200 37 Video Netcam | SNC-L200 Smart Viewer Administration Menu Smart Viewer Administration Menu 5. 2. 1 Network Configuration 1) Static IP When Netcam network configuration is Static IP (Public IP, Private IP), you may set the Static IP Address. If you want to set Static IP, you must set IP Address, NetMask, Gateway, DNS 1, DNS 2, etc. Generally, the network administrator administers these items. You need to contact the network administrator and allocate them accordingly. 5. 2. 2 PPPoE (ADSL) Choose it when Netcam network configuration is ADSL. In PPPoE (ADSL), the IP Address allocation process occurs automatically like in DHCP. Therefore, IP Address may change continuously. You may use it in parallel with DDNS, or use Network Status Notification to enter to the Address allocated to the equipment. [. . . ] To run the Print function, you must install and set the Printer in Print Setup that is at the top or Print. 1) Select the video you want to print from the screen window where videos are displayed. The following screen appears. - - - - 6. 8. 3. Various Playback and Search - 1x speed playback, reverse direction playback - Stop and Pause - 3x speed Fast Forward and Rewind for search - Fine search with 1 screen forward and rewind playback - Search for several recorded files in sequence, search for several files simultaneously by moving to before /after file starting pint. [. . . ]