User manual SAMSUNG SP-43T6HP

[. . . ] Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the different formats as a full screen picture. [. . . ] Result: The main menu is displayed. 2 Press the M or L button to select CHANNEL. Result: The options available in the CHANNEL group are displayed. button. 3 4 Press the Press the M or L button to select MANUAL STORE. Result: The options available in the MANUAL STORE group are displayed with COLOUR SYSTEM is selected. MANUAL STORE COLOUR SYSTEM SOUND SYSTEM SEARCH CHANNEL PROG. NO. STORE SELECT ADJUST : : : : : : AUTO BG 105MHZ C6 P3 ?EXIT 5 Indicate the broadcasting standard required by pressing the or button repeatedly. Result: The colour standards are displayed in the following order: AUTO - PAL - SECAM - NT4. 43 - NT3. 58. 6 Press the M or L button to select SOUND SYSTEM. Select the sound standard required by pressing the or button repeatedly. Result: The sound standards are displayed in the following order: BG - DK - I - M. 20 Storing Channels Manually (continued) ENG 7 If you know the number of the channel to be stored, see the following steps. N Press the t or L button to select CHANNEL. N Press the M or L button to select C (Air channel) or S (Cable channel). If necessary, select ADDED or ERASED by pressing the or button. Repeat Step 6 for each channel to be added or erased. 6 SELECT ADJUST EXIT 22 Fine Tuning Channel Reception ENG If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. CHANNEL AUTO STORE MANUAL STORE ADD/ERASE FINE TUNE SORT 1 Press the MENU button. Result: The main menu is displayed. 2 Press the M or L button to select CHANNEL. Result: The options available in the CHANNEL group are displayed. button. SELECT ENTER EXIT 3 4 Press the FINE TUNE TUNE STORE ERASE : -/+ :?:? Press the M or L button to select FINE TUNE. Result: The options available in the FINE TUNE group are displayed with TUNE is selected. SELECT ADJUST EXIT 5 To obtain a sharp and clear picture and good sound quality, press the or button. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the or button. FINE TUNE 6 To memorise adjusted picture or sound, select STORE by pressing the M or L button. Result: OK is displayed. FINE TUNE TUNE STORE ERASE : -/+ : OK :? 7 To erase adjusted picture or sound, select ERASE by pressing the M or L button. [. . . ] Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time. Press the (store) button until the corresponding blocks blink. Mute VOL P Still Menu Video 41 Connecting to the External Input/Outputs ENG Rear of the TV VIDEO L - AUDIO - R MONITOR OUT VCR I AV3 N P U T AV2 y Decoder / Video game device x AV1(RGB IN) z Video disc player or or Satellite receiver AV1 is used for the equipment with an RGB output, such as video game devices or video disc players. x This end can be fitted with: N A SCART connector N An S-Video connector and two audio RCA connectors (L+R); AV2 N Three RCA connectors (VIDEO + AUDIO-L and R) target VCR to AV3 so that you can redirect the signal from AV2 to AV3. y If you have a second VCR and wish to copy cassette tape, connect the source VCR to AV2 and the z If you have a decoder, connect the decoder to the VCR and the VCR to the television. When you wish to record a programme, connect the receiver to AV2 and the VCR to AV3 so that you can redirect the signal from AV2 to AV3. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. 42 Connecting to the DVD Input ENG The DVD RCA connectors are used for equipment with a DVD output. Rear of the TV DVD Y Pb Pr DVD AL U D I OR Connecting to the Audio Output The AUDIO OUT RCA connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system A U L D I O RO U T 43 Connecting to the RCA Input (depending on the model) ENG The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices. Front of the TV Camcorder Side of the TV Video game device Video disc player Connecting to the S-Video Input (depending on the model) Front of the TV The S-VIDEO and RCA (AUDIO-L+R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV x Camcorder and VCR Rear of the TV S-VIDEO1 x To play pictures and sound, both the S-VIDEO and RCA connectors must be used. 44 Connecting Additional Speakers (depending on the model) ENG To take advantage of the surround sound system, connect additional speakers. [. . . ]