User manual SAMSUNG SP-47Q1HER

[. . . ] During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial. Do not step on or twist the power cord. Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. [. . . ] button to select a letter (A~Z), a number (0~9) or a symbol (-, space). Move on the previous or next letter by pressing the oe or button. When you have finished entering the name, press the ENTER ( ) button to confirm the name. TV Prog. 2 3 4 5 6 --------------------- Name Name 6 7 Move Enter Return 8 TV Prog. 2 3 4 5 6 --------------------- Name Name oe Move Adjust Return 22 Activating the Child Lock ENG Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. TV Country Auto Store Manual Store Edit Fine Tune Ch. Scan Channel : Austria : Off Move Enter Return 1 2 Press the MENU ( ) button. The options available in the Channel group are Result: displayed. ) TV LNA Edit Add/Delete Sort Name Child Lock 3 4 Press the or . . . Result: Move Enter Return 5 Press the or . . . Result: Press the ENTER ( ) button to change the setting. The options are displayed in the following order. Custom : Contrast, Brightness, Sharpness, Color Move Enter Return 6 Contrast 70 is Move horizontal The horizontal barby displayed. the oe orthe button. bar's cursor left or right pressing When mode is set to Custom, the value of these option the picturebe changed depending on the input source may vary any changes to these If you makeautomatically switchedsettings, the picture standard is to the Custom Color Tone : Cool2, Cool1, Normal, Warm1, Warm2 (ex. RF, Video, Component, PC or DVI). TV Mode Custom Color Tone Color Adjust Size Digital NR DNIe PIP Move Picture : Dynamic Cool2 : Normal Cool1 : 16 : 9 Normal : On Warm1 : On Warm2 Enter Return 7 When you are satisfied with the settings, press the EXIT ( button to return to nomal viewing. ) 26 Adjusting the Picture Settings (PC or DVI Mode) 1 2 Preset to the PC or DVI mode by using the SOURCE button. ENG Press the MENU ( ) button. The options available in the Picture group are Result: displayed. Press the ENTER ( ) button. TV Mode Custom Color Tone Color Adjust Size Digital NR DNIe PIP Move Picture : Custom : Custom : 16 : 9 : On : On Enter Return 3 4 Press the or . . . Result: The Custom menu is displayed. TV Custom Contrast Brightness 70 50 5 Press the or . . . button to select the option (Contrast, Brightness) to be adjusted. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the oe or button. [. . . ] Also, make sure that the PC is connected. When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the television (Otherwise, random signals might appear). When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable connections. 59 Pin Configurations ENG SCART Connector (AV1/AV2/AV3) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Signal Audio output R Audio input R Audio output L Audio chassis return Video chassis return (RGB blue) Audio input L RGB blue input Switching voltage Video chassis return (RGB green) RGB green input Video chassis return (RGB red) RGB red input Blanking signal (RGB switching) Video chassis return Blanking signal ground Video output Video input Screening/chassis return DVI Input Connector (24Pin) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Signal T. M. D. S. Data4+ Clock (DDC) Data (DDC) Not Connected T. M. D. S. [. . . ]