User manual SAMSUNG SP-52Q2HL

[. . . ] SP42Q2HL SP47Q2HL SP52Q2HL SP54T8HL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROJECTION TELEVISION . . . . . . . . . . . . . Owner's Instructions This device is a Class B digital apparatus. BP68-00373A-01 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. [. . . ] or button, then press the ENTER button. TV Self Focus Self Focus Auto : Off On Message Display : On Move Enter Return Removing the "Self Focus" Message from the Display 3 Press the . . . or button to select "Message Display", then press the ENTER button. To remove the message "Self Focus" and horizontal bar on the screen during the self focus process, select "Off" by pressing the . . . or button, then press the ENTER button. Press the EXIT button to exit. TV Self Focus Self Focus Auto : On Message Display : Off On On Move Enter Return English - 23 O P E R AT I O N Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. Selecting the Video Signal Source Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i. e. , an antenna or a cable system). 1 Press the MENU button. or button to select "Channel", then press the ENTER button. TV Channel Air/CATV : Air Auto Program Favorite Channels Fine Tune oe 00 Add/Delete Name oe --- Move Enter Return 2 Press the ENTER button to select "Air/CATV". or button to select "Air", "STD", "HRC" or "IRC", then press the ENTER button. TV Channel Air/CATV : Air STD Auto Program Favorite ChannelsHRC Fine Tune 00 oe IRC Add/Delete Name oe ---- oe If you are connected to an antenna, press the . . . oe If you connected cable, press the . . . or button to select the type of cable system: "STD", "HRC" or "IRC". Move Enter Return Press the EXIT button to exit. · "STD", "HRC" and "IRC" identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to "Storing Channels in Memory". · Subscription cable services require service-specific requirement for viewing. English - 24 O P E R AT I O N Storing Channels in Memory (Automatic Method) First, select the correct signal source ("Air", "STD", "HRC" or "IRC") as described on the previous page. 1 Press the MENU button. or button to select "Channel", then press the ENTER button. TV Channel Air/CATV : Air Auto Program Favorite Channels Fine Tune oe 00 Add/Delete Name oe --- Move Enter Return 2 Press the . . . or button to select "Auto Program", then press the ENTER button. Enter Auto Program Start Return Press the ENTER button to start the auto program. The TV begins memorizing all of the available stations. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. Auto Program Air Stop Enter Return 11 English - 25 O P E R AT I O N Adding and Erasing Channels To add channels that were not memorized (or to delete unwanted channels from memory): 1 Press the MENU button. or button to select "Channel", then press the ENTER button. TV Channel Air/CATV : Air Auto Program Favorite Channels Fine Tune oe 00 Add/Delete Name oe --- Move Enter Return 2 Press the . . . or button to select "Add/Delete", then press the ENTER button. [. . . ] Press the EXIT button to exit. TV Time Clock On Timer Off Timer Sleep Timer --:--am : Off Off : Off 30 : Off 60 90 120 150 180 Return Move Enter Alternate method: Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from "30" to "180" minutes). Sleep Timer Off English - 49 S P E C I A L F E AT U R E S Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV the , universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). · The remote control might not be compatible with all VCRs, DVD players and Cable boxes. Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. oe The remote control has five modes: TV, STB, VCR, CABLE and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). oe Make sure you enter 3 digits of the code, even if the first digit is a "0". (If more than one code listed, try the first one. ) 5 Press the POWER button on the remote control. Your VCR (Cable box or DVD player) should turn on. [. . . ]