User manual SAMSUNG SP-55W3HF

[. . . ] COLOUR TELEVISION SP42W4/42W5 SP43J9/43T6/43T7/43T8/43W6 SP47Q7/47W1/47W3 SP48T6 SP52Q7 SP54J9/54T6/54T7/54T8 SP55W3/55W9 SP62J9/62T6/62T8 SP65W3 Owner's Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE TELETEXT Important Warranty Information Regarding Television Format Viewing ENG Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, and constantly moving. [. . . ] N Press the t or L button to select CHANNEL. N Press the M or L button to select C (Air channel) or S (Cable channel). N Press the M or L button to select indicate the required number. MANUAL STORE COLOUR SYSTEM SOUND SYSTEM SEARCH CHANNEL PROG. NO. STORE SELECT ADJUST : AUTO : : : : : BG 105MHZ C6 P3 ?EXIT 8 If no sound or abnormal sound, re-select the sound standard required. MANUAL STORE COLOUR SYSTEM SOUND SYSTEM SEARCH CHANNEL PROG. NO. STORE SELECT SEARCH : : : : : : AUTO BG 105MHZ C6 P3 ?EXIT If you do not know the channel numbers, select SEARCH by pressing the M or L button. Press the or button to start the search. Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen. 9 To assign a programme number to a channel, select PROG. NO. Press the or button to find the correct number. To store the channel and associated programme number, select STORE by pressing the M or L button. Repeat Steps 7 to 10 for each channel to be stored. MANUAL STORE COLOUR SYSTEM SOUND SYSTEM SEARCH CHANNEL PROG. NO. STORE SELECT ADJUST : : : : : : AUTO BG 105MHZ C6 P3 ?EXIT 10 11 Channel mode N P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode. N C (Real channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. N S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. MANUAL STORE COLOUR SYSTEM SOUND SYSTEM SEARCH CHANNEL PROG. NO. STORE SELECT ADJUST : : : : : : AUTO BG 105MHZ C6 P3 OK EXIT 21 Skipping Unwanted Channels ENG CHANNEL AUTO STORE MANUAL STORE ADD/ERASE FINE TUNE SORT You can exclude the channels you chosen from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All of the channels that you do not specifically choose to skip are displayed during scanning. 1 SELECT ENTER EXIT Press the MENU button. Result: The main menu is displayed. 2 ADD/ERASE P P P P 1 2 3 4 : : : : ADDED ADDED ADDED ADDED Press the M or L button to select CHANNEL. Result: The options available in the CHANNEL group are displayed. [. . . ] The speaker terminals are located on the rear of the television: N Two for the left-hand surround speaker (marked L) N Two for the right-hand surround speaker (marked R) N Two for the center speaker (marked C) ; Option Rear of the TV To improve the quality of the sound, connect the: N Red wire to the red terminal N Black wire to the black terminal Viewing Pictures From External Sources Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. TV Surround S. STD P. STD S. Mode 1 2 Check that all the necessary connections have been made. Switch your television on, then press the VIDEO button repeatedly. Result: The input sources are displayed in the following order: TV - AV1 - AV2 - AV3 - AV4 - S-VHS1 - S-VHS2 - DVD. Mute VOL P Still Menu Video Depending on the source selected, the pictures may appear automatically. To watch television programmes again, press the TV button and select the number of the channel required. 45 Programming the Remote Control for Other Components ENG This TV's remote control can operate almost any VCR, Cable box, or DVD, in addition to controlling the TV. Power VCR Cable DVD SET The remote control might not be compatible with the TV manufactured by another company. TV 1 2 Turn off your VCR, Cable box, or DVD. Press the appropriate button among the component selection buttons to activate another component (TV, VCR, Cable, DVD). [. . . ]