User manual SAMSUNG SP-M226

[. . . ] SP-M206 SP-M226 SP-M256 SP-M275 SP-M305 LCD Projector Owner's Instructions The color and the appearance of the product may differ from the illustrations in this manual. The specifications are subject to change without prior notice to improve performance. Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . 1-3 INSTALLATION AND CONNECTION Package Contents . 2-4 Screen Size and Projection Distance . [. . . ] Setup MENU Install DESCRIPTION To tailor the picture to the installation location, (for example, behind a semi-transparent screen, hanging from the ceiling), you can invert the projected images vertically / horizontally. · · · · <Front-Floor> : Normal Image <Front-Ceiling> : Horizontal/Vertical Reversed Image <Rear-Floor> : Horizontally Reversed Image <Rear-Ceiling> : Vertically Reversed Image Lamp Mode Using this function, you can set the image brightness by adjusting the amount of light generated by the lamp. · <Eco> : This mode is optimized for screens smaller than 100 inches. This mode decreases the lamp brightness and power consumption in order to extend the lamp lifetime and reduce noise and power consumption. <Bright> : This mode maximizes the lamp brightness when the ambient illumination is bright. As the brightness of the lamp increases, the lamp lifetime may be reduced and the noise and power consumption may increase. · Auto Keystone If video scenes are distorted or tilted, you can compensate for this by setting the <Auto Keystone> function to <On> so that the <V-Keystone> function automatically starts. · <Off>-<On> V-Keystone If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone function. · · The sound output of your projector is temporarily stopped while the keystone is being changed. Keystone does not compensate for distortion in the On Screen Display (OSD) menu. Background You can select an image or screen which will appear when there is no signal from the external device connected to the projector. <Logo>-<Custom Logo>-<Blue>-<Black> The recommended resolution for a picture to be set as the user logo is 600x300. Test Pattern A default test pattern built into the projector. You can use it as a reference picture to optimize the installation of the projector and to optimize images. · · <Crosshatch> : You can check whether the picture is distorted or not. <Screen Size> : You can reference and display picture format sizes such as 1. 33 : 1 or 1. 78 : 1. Using 3-5 MENU Video Type DESCRIPTION If the screen quality is abnormal as a result of the projector not identifying the input signal type automatically in <PC> or <HDMI> mode, Video Type lets you manually set the input signal. This function does not work in <Media Play> mode. · In <PC> mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V sync, it is only enabled for a 1280 x 720p 59. 94Hz/60Hz signal. · · <Auto>-<RGB(PC)>-<RGB(AV)>-<YPbPr(AV)> In <HDMI> mode, <Video Type> is only enabled for the 640x480p 59. 94Hz/60 Hz and 1280x720p 59. 94Hz/60 Hz signals. · <Auto>-<PC>-<AV> Usage Color, Sharpness, Tint PC menu zoom Caption The <Caption> function is supported when the external analog signal from the Video input contains subtitles. · · · · <Caption> : <Off>-<On> <Mode> : <Caption>-<Text> <Channel> : <1>-<2> <Field> : <1>-<2> · · · Activated only in <AV> Mode. Depending on the external signal, a change to the channel or <Field> settings may be required. Each <Channel> and <Field> contains different information. <Field><2> carries additional information to supplement information contained in <Field><1>. [. . . ] Like other video display devices, the LCD panel may contain bad pixels which do not operate. When shipping a product, the conditions for identifying bad pixels and the number of bad pixels that a LCD panel is allowed to contain are strictly managed in accordance with the relevant specified standards by the LCD panel manufacturer and our company. Though a screen may have some dead pixels, this does not affect the overall screen quality and the lifetime of the product. More Information 6-1 6-2 RS232C Command Table Communication Format (Complies with the RS232C Standard) · · · · Baud rate : 9, 600 bps parity : None Data bits : 8, stop bit : 1 Flow Control : None Serial Communication Protocol 1. Command Packet Structure [7bytes] 0x08 · · · · · · · · · · 0x22 cmd1 cmd2 cmd3 value CS A command packet consists of 7 bytes in total. [. . . ]