User manual SAMSUNG SP-P310ME

[. . . ] To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. The images here are for reference only, and are not applicable in all cases (or countries). Failure to follow the instructions marked with this symbol may cause personal injury or even fatality. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property. | Power Related | Installation Related | Cleaning and Use Related | Insert the power plug firmly so that it does not come loose. [. . . ] Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displayed clearly. When installing the screen in a bright surrounding, use curtains. You can install the projector (To view the installation position settings) To view the picture when installing the projector behind the screen, front floor / fro ceiling / rear floor / rear ceiling. nt Install a semi-transparent screen. Select Menu > Setup > Install > Rear-Floor To view the picture when installing the projector in the front of the screen, Install the projector at the side where you are watching the screen. Select Menu > Setup > Install > Front-Floor Focusing Turn the Focus Ring left or right until the picture on the screen is displayed clearly. If the distance between the projector and the screen is farther or shorter than the specified projection distance (Refer to the Screen Size and Projection Distance), the focus adjustment might fail. Screen Size and Projection Distance Distance m 0. 5 1. 0 1. 64 2. 0 2. 8 ft 1. 64 3. 28 5. 38 6. 56 9. 18 mm x mm 25. 5 x 19. 1 50. 8 x 38. 1 83. 3 x 62. 5 101. 6 x 76. 2 127. 0 x 95. 3 Picture size Diagonal (inch) inch x inch 1. 0 x 0. 75 2. 0 x 1. 5 3. 28 x 2. 46 4. 0 x 3. 0 5. 0 x 3. 75 12. 5 25. 0 41. 0 50. 0 63. 0 | Basic Settings | Connecting the Power | Connecting to a PC | Connecting to an AV device | Connect the adapter to the power port( ). Connect the power cord to the adapter and connect it to a wall outlet. When the power is connected, the screen turns on automatically. Do not look at the lens while connecting the power. Use only an authorized adapter. | Basic Settings | Connecting the Power | Connecting to a PC | Connecting to an AV device | Connect the [PC/COMPOSITE] port on the side of the projector to the Monitor OUT port [D-Sub] of your PC using a PC/Composite cable. When all the connections above have been connected, turn the projector and the PC on. Using the Projector Selecting the external input source. Select PC input by pressing the SOURCE button. ( SOURCE ) Select PC input by pressing the Menu and the Adjust buttons. ( Menu > Input > Source List > PC ) Adjust the screen so that the picture can be viewed comfortably. To listen to audio, a separate audio system is required. Connect a PC/Composite cable to the [PC/COMPOSITE] port on the side of the projector and then connect the [COMPOSITE Input (Yellow)] connector of the PC/Composite cable to the VIDEO OUT (Yellow) port of the AV device using a video cable. When all the connections above have been completed, turn the projector and video devices on. How to Use Selecting the external input source. Press the SOURCE button and select the Composite input ( SOURCE ) Select the Composite input using the Menu and the Adjust buttons. ( Menu > Input > Source List > Composite ) Turn on the connected AV device and check. To listen to audio, a separate audio system is required. | Buttons | Input | Picture | Setup | Menu Option | Information | 1. Power Button[ ] To turn it on : Press the Power button. The Power LED will light up and the power is turned on. To turn it off : Press the Power button until the Power LED is turned off. 2. Menu Button[ ] Displays the OSD menu. This is also used to exit the OSD or to return to a higher level of the OSD menu. 3. [. . . ] A method developed in France to transmit and receive the color TV broadcasting. SECAM is mainly used in France and Eastern European countries. 625 lines / 50 Hz Super VGA (SVGA) SVGA provides a graphics resolution of 800x600 pixels. This standard includes a vertical frequency version. [. . . ]