User manual SAMSUNG SP-0802N/KIT

[. . . ] Never push objects of any kind into your telephone through case or cabinet openings. They may touch dangerous voltage points resulting in risk of fire or shock. To reduce the risk of electric shock, do not disassemble your telephone. Take it to a qualified service technician when repair work is required. [. . . ] Press the soft key repeatedly until Received Calls appears. 3. The LCD window shows the last caller's number, and the date and time when the call was received, if the necessary information was transmitted from the caller's telephone network. If the address number blinks, it means you missed the call. Note: If there is no number received, Received Calls Empty is displayed. Edit Name Edit the name by using the keypad and C key, and then press the OK soft key. For details on entering a name, see page 37. Your phone displays the newly edited name, its number and its address number. 4. To dial the selected number, press soft key and choose the desired key. Edit Number Edit the number by using the keypad and C key, then press the OK soft key. Your phone displays the newly edited number, its name and its address number. Erase If you press the Select soft key when Erase is selected, you are asked to confirm the deletion. Press the Yes soft key to confirm the deletion. 40 41 R ECEIVED CA L L S Greeting Message Received Calls Options When you are viewing received numbers, Options appears above the left soft key to allow you to access the received call options, which are described in the following paragraphs. This option allows you to enter a greeting message that will be displayed when your phone is in the Standby mode. You can change the greeting message according to your own preference. To write your greeting message, follow this procedure; Accessing the Options 1. Press the Select soft key to access the option. Press the soft key repeatedly until you choose a desired ring tone. Each time you press the soft key, the handset sounds the ring you have chosen. Press the OK soft key to confirm the setting. 8. During recording, the LCD window displays the recording duration. The time limit for recording is 1 minute. To stop the recording, press or key. Notes: · If an incoming call comes in while recording, the recording is cancelled. · If you record to a location which has a recorded bell, the location is updated with the newly recorded bell. · When recording, you should bring the bell sound to be recorded close to the microphone. · When the memory is full, you cannot record your ring bell. Turning the Feature On/Off Note: Before you turn this feature on, you have to record your bell. My Bell (Base Only) You can differentiate your ring bell from other handsets and bases by recording your own bell. To use the feature, you have to activate the feature on and select a recorded bell. [. . . ] If you want to change the RCC number, see page 74. · If you do not enter the RCC number within 7 seconds after you press key, or fail to enter the correct RCC number three times successively, your call will be disconnected. Turn the Answering mode on/off Note: While a greeting message is being played, press 5 key to select another greeting message. While the greeting message you want is being played, press 2 key. Playback stops and the last played message is selected. 42 78 43 79 A NSWERING SYSTEM A NSWERING SYSTEM Troubleshooting Setting the Answering Mode From Another Phone Line Symptom If your answering machine has been set to off, you can turn the system on from another telephone line. [. . . ]