User manual SAMSUNG SP-0822N/KIT

[. . . ] 2-5 Connecting an A/V device with a Component/D-Sub Cable . 3-4 Using the Screen Adjustment Menu (OSD: On Screen Display) . 3-5 MEDIA PLAY FUNCTION Precautions on using a USB storage device Photo Music . 4-7 TROUBLESHOOTING Before Requesting Service . [. . . ] Cool your projector down sufficiently and then operate it again. If the same problem occurs again, contact a Samsung service center. Action 2 Action 3 When the sensor system inside the projector is not operating normally. This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, which does not affect the product performance and is part of normal operation. 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD: On Screen Display) Structure 3-4 Using MENU Input Picture Source List Mode Edit Name Size SUB-MENU Position Digital NR Black Level Film Mode Setup Install Video Type Option Language PC V-Keystone Zoom Background Test Pattern Factory Default Menu Option Information 3-5-1. Input MENU Source List DESCRIPTION You can select a device connected to the projector to display. · <Video>- <PC>-<MEDIA PLAY> Edit Name You can edit the names of devices connected to the projector. · <VCR>- <DVD>- <Cable STB>- <HD STB>- <Satellite STB>- <AV Receiver>- <DVD Receiver><Game>- <Camcorder>- <DVD Combo>- <PC> 3-5-2. Picture Using 3-5 MENU Mode DESCRIPTION Select a screen state which is customized to your projector or change the screen mode as required. · <Mode> · <Dynamic > : Select this mode for a brighter and sharper picture than Standard Mode. · <Standard> : This is the picture mode optimized to the standard broadcast signal. · <Movie> : Optimize the picture for watching movies. · <Monitor> : Optimize the picture for presentatations. · <Vivid > : The gamma mode suitable for watching a movie. · · <Save > : Used to save custom picture settings. <Reset > : Restores the mode settings to the factory defaults. Size You can select a screen size according to the type of scene. · <Normal>-<Zoom 1 >-<Zoom 2 >-<16 : 9> Available picture size in the PC and Media Play mode is <normal>, <16:9>. 3-5 Using MENU Position DESCRIPTION Adjust the screen position if it is not aligned. You can only set a position in <PC> mode. Digital NR When a dotted line is displayed or the screen shakes, you can view the picture with better visual quality by enabling Noise Reduction. If the picture seems too bright, you can set a darker black level. Black level is automatically set in the <Video> input mode. You can make the manual settings shown below only when a component signal is supplied. · · <0 IRE> : Default black level. <7. 5 IRE> : Set the black level so it is darker. Black Level Film Mode Using this function, you can set the display mode optimized for playing movies. <Film Mode> provides optimal display settings for movies. [. . . ] Be sure that the proper input source is selected. Check that the connectors are properly connected to the ports at the back of the projector. Be sure that the <Color>, <Brightness> settings are not at their lower limit. Poor color. Images are not clear. Adjust the <Tint> and <Contrast>. [. . . ]