User manual SAMSUNG SP-1644N/TKY

[. . . ] There is a danger of electric shock or fire. Under no circumstances touch the power plug with wet hands. There is a danger of electric shock. Do not plug multiple devices into a single wall outlet. There is a danger of fire. Do not bend the power cord excessively or place heavy objects on it. There is a danger of electric shock or fire. Before moving the product, make sure the power is off and remove the power cord from the wall outlet. [. . . ] When finishing connecting the devices, connect the power of the projector and the VCR. Using the Projector Turn on the projector and press the [Video] button to select <Video>. or Press the [S-VIDEO] button to select S-Video. Check that the projector and the video equipment are turned off before connecting cables. (Separate audio system is needed for sound. ) Connecting to PC Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. When connections are all completed, connect both power cords of the projector and the PC. This product supports plug and play, therefore you do not need to install a driver on your PC. Using the Projector Turn on the projector and press the [PC] button to select <PC>. If PC Mode is not available, check PC video cable is in place. Turn on the PC and set the PC Environment when necessary. Adjust the screen. (Auto Adjustment) Sound comes out from PC speakers. Connecting Video Devices (Monitor, TV, etc. ) - When using the D-sub (analog) output through another video device (monitor, TV, etc. ). Connect the MONITOR OUT terminal of the projector and the D-sub terminal of the video device using a D-sub cable. After connecting them, turn on your projector and the video device (monitor, TV, etc. ). The MONITOR OUT function only operates when the projector is connected to an external device through the [PC IN] input terminal. | Input | Picture | Setup | Option | * Click the Play( Screen Adjustment Source List Description )/Stop( ) button in the table below to view the video file. Play/Stop You can select a device connected to the projector to display. 1) Component 2) S-Video 3) Video Edit Name 4) PC 5) HDMI You can edit the names of devices connected to the projector. 1) Component 2) S-Video 3) Video 4) PC 5) HDMI | Input | Picture | Setup | Option | * Click the Play( Screen Adjustment Mode )/Stop( ) button in the table below to view the video file. Description Select a screen state which is customized to your projector or change the screen mode as required. 1) Mode - Dynamic Select this if you want the screen quality to be clearer than standard screen quality. 5) R-Offset 6) G-Offset 7) B-Offset R-Offset G-Offset B-Offset - Film : The best setting for watching a film. - Video : The best setting for watching a TV program. - Graphic : The best setting when you have a PC connected. 9) Save : Used to save custom picture settings. Gamma Save 10) Reset : Restores the mode settings to the factory defaults. Reset Size You can select a screen size according to the type of scene. Refer to "Size Support Mode". 1) Normal 2) Zoom1 3) Zoom2 4)16:9 Position Adjust the screen position if it is not aligned. Refer to "Position Moving Support Mode". Digital NR When a dotted line is displayed or the screen shakes, you can view a better visual quality picture by enabling Noise Reduction. Black Level Using the Black Level function, you can set the light level of the darkest portion of the video signal so that you can clearly see dark areas on the screen. The Black Level can only be selected in [Video], [S-Video] and [HDMI] modes. For [Video] and [S-Video] Modes 1) 0 IRE : Sets the light level of the darkest portion of the video signal to low. If the setting does not match the input signal, the dark screen looks milky-white. [. . . ] Color Standard A pre-determined default color standard determined by the broadcasting standard of the corresponding country or area. Color Temperature Color temperature is a simplified way to characterize the spectral properties of a light source. A low color temperature implies a warmer (more yellow/red) light while a high color temperature implies a colder (more blue) light. COMPOSITE IN Port A COMPOSITE IN Port is a general video input port (yellow). [. . . ]