User manual SAMSUNG SP-2014N/TKY

[. . . ] 2-11 Connecting a DVD player/Cable/Satellite Box via Component . 3-4 Using the Screen Adjustment Menu (OSD: On Screen Display) . 3-5 TROUBLESHOOTING Before Requesting Service . 4-1 MORE INFORMATION Specifications . [. . . ] POWER ( ) Button Used for Focus Adjustment. You can adjust the screen position by moving the adjustable feet up and down. Use this button to select the external device signal. / Select / : Use this button to move to or select an item within a menu. 8. Move button ·The buttons on the top of the projector are touch buttons. Touch them lightly with your fingers to use them. 3-2 Using 3-3 Remote Control 1. ON Button (|) Used to turn on the projector. AUTO Button Adjusts the Picture automatically. MENU Button ( ) Used to display the Menu Screen. Move ( )/ ( ) Button Used to move to or select each menu item. KEYSTONE Button ( ) Use this when the screen is displayed in a trapezoid shape. The memory in the product is not operating normally. The power for the product is not operating normally. A problem has occurred when operating the color wheel in the product. Refer to Action 4. Clearing Indicator Problems 3-4 Using CLASSIFICA TION Action 1 STATE When the cooling fan system is not in normal operating condition. When the lamp cover protecting the lamp unit is not properly closed or the sensor system is not in normal operating condition. When temperature inside of the projector becomes too high. MEASURES If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact a Samsung service center. Check whether the screws at the bottom side of the projector are fastened correctly. If they are abnormally fastened, contact a Samsung service center. Action 2 Action 3 Adjust the installation state of your projector by referring to the Installation Precautions section listed above. Cool down your projector sufficiently and then operate it again. If the same problem occurs continually, contact a Samsung service center. Disconnect and reconnect the power cord and start the projector again. [. . . ] Class A is for business while class B emits less electromagnetic waves than class A. The DMD Panel used in DLP Projectors consists of several hundred thousand micro mirrors. As with other visual display elements, the DMD Panel may include a few bad pixels. Samsung and the DMD Panel manufacturer have a rigid, bad pixel identification and limitation procedure in place and products will not exceed the maximum number of bad pixels set by our standards. [. . . ]