User manual SAMSUNG SP-2504C/C

[. . . ] Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the different formats as a full screen picture. [. . . ] These names can be changed, allowing you to assign new names. 1 Press the Menu button. Result: The main menu is displayed. 2 Press the M or L button to select Channel. Result: The options available in the Channel group are displayed. button. 3 4 Press the Press the M or L button to select Name. Press the Result: The Name menu is displayed with the current channel automatically is selected. 5 If necessary, select the channel to be assigned to a new name by pressing the M or L button. Result: Arrow indications are displayed around the name box. 6 Press the M or L button to select a letter (A~Z), a number (0~9) or a symbol (-, space). Move on the previous or next letter by pressing the or button. When you have finished entering the name, press the to confirm the name. button 7 8 Repeat Steps 5 to 7 for each channel to be assigned to a new name. 22 Activating the Child Lock and Skipping Unwanted Channels ENG N Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. Press the Result: The options available in the Adjust group are displayed with Color tone is selected. 4 5 Press the or button to select the option (Cool2, Cool1, Normal, Warm1, Warm2). Press the M or L button to select the option (Contrast, Brightness, Sharpness, Color or Tint-NTSC only) to be adjusted. Result: The horizontal bar is displayed. Move the horizontal bar's cursor left or right by pressing the or button. If you make any changes to these settings, the picture standard is automatically switched to Custom. Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the "Still" button. Mute VOL P Still To return to normal viewing, press this button again. Menu Video 25 Extra Picture Settings ENG N Scan Mode You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. Auto, Natural, Digital and Progressive modes are available. N Digital NR If the signal received by your television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen. N Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off. N LNA This feature is very useful in the situation that the TV is used in a weak signal and amplifies the TV signal in the weak signal area, but not noise. This feature is working only in a weak signal condition, and that is memorized on current channel, additional. 1 Press the Menu button. [. . . ] Example: To enter the code "6", press 0, 0, and 6. To enter the code "76", press 0, 7, and 6. 5 See the remote control code tables to find the appropriate code for your particular component. If more than one code is listed, try each one separately until you find the one that works. Press the Power ( ) button on the remote control. The component you select should turn on. [. . . ]