User manual SAMSUNG SPF-72V

[. . . ] | Safety Symbols | Power | Installation | Using and Cleaning | Safety Symbols Make sure to follow the directions below to prevent accidents and damage to the product. Failure to follow the accompanying directions may lead to serious injury or death. Failure to follow the accompanying directions may lead to minor personal injury or property damage. | Safety Symbols | Power | Installation | Using and Cleaning | Power The images here are for reference only, and are not applicable in all cases (or countries). Insert the power plug correctly until it is firmly in place. Failing to do so, may cause fire. Do not use a damaged power plug, cord or outlet, as this may cause electric shock or fire. Do not touch the power plug with wet hands, as this may cause electric shock. Do not connect more than one appliance to a single outlet, as an overheated outlet may cause fire. Do not use force to pull the power cord. Don't place anything heavy on the power cord, as this may cause electric shock or fire. Make sure to turn the power off and disconnect the power plug from the outlet before moving the product. Make sure to disconnect the connection cables from other devices as well. [. . . ] (If there are no APs displayed, click "Refresh Networks" to update the list. ) Select an AP to connect to and the connection state is displayed in a popup window and the "Choose Computer" screen will appear. 3. Choose Computer A list of PCs is displayed. (If there are no PCs displayed, click "Refresh List" to update the list. ) Select a PC to connect to and the Main screen will appear. Ensure that the settings are confi gured as shown below. Otherwise, your PC may not be displayed in the list or you may not be able to connect to it. In Vista, select Control Panel > Network and Sharing Center > Customize. Check whether the Location type is set to Private. Select Digital Photo Frame from the Windows Media Player > Library > Media Sharing list. Check whether it is set to Allow. Installation Program Guide and User Recommendations Windows XP We highly recommend installing . Net Framework 3. 0. Click on the "Frame Manager" icon in the Manual - Main screen to run the installation file. Installing Frame Manager Windows Media Player 11 or later must be installed. Digital Image Library Starter Edition (DISE) : This program allows you to change the ratings for the photos on your Digital Photo Frame via your PC. Recommendations when using the Digital Photo Frame: Internet Explorer 7. 0 or higher Windows Vista Click on the "Frame Manager" icon in the Manual - Main screen to run the installation file. Installing Frame Manager Settings for Sharing the Photos on your PC - Configuring Your Windows Vista Adding Photos to the Library Run Windows Media Player. Click the [Library] tab at the top. Click [Add To Library] in the [Library] tab. In the [Add To Library] window, select [My personal folders] under the [Select the folders to monitor] section and select the folder containing photos and click [Add]. Select the folder to share and click [OK] to add it. When you click [OK], the [Add To Library] window is closed and the [Add to Library by Searching Computer] is displayed. Wait until it finishes the operation and click [Close] when it is completed. Checking Shared Photos In the Windows Media Player, set the Category, which is under the [ to [Picture]. , ] symbol at the top left, In the [Library], select Recently added, All Pictures, Keywords, Date Taken, Rating, or Folder settings and check whether the added photos exist in the library. Sharing Settings for Accepting Connections from Your Photo Frame In the [Library] tab, click on [Media Sharing]. In the [Media Sharing] window, check the [Share my media] checkbox under [Sharing settings]. If no [Available device] is displayed in the [Media Sharing] window, proceed to steps 4. If displayed, proceed to step 5. In the [Media Sharing] window, click [Networking] and check whether the current network is set to [Private network]. If not, set it to [Private Network]. If your network is a Private network, the [Available Device] list and the [Settings] button are displayed in the [Media Sharing] window. In the [Media Sharing] window, click [Settings]. The [Media Sharing-Default Settings] window is displayed. In the [Media Sharing-Default Settings] window, set the [Media Type] to [Picture], both [Star ratings] and [Parental ratings] to [All ratings] or a required rating under the [Default Settings] section. If you want to add a device or computer which tries to connect to the library to the list automatically, check the [Add new devices and computers automatically] checkbox. Only photos can be transmitted via PC sharing. Settings for Sharing the Photos on Your PC - Configuring Your Photo Frame Checking Network Connections Check whether the Network icon is displayed at the left top of the Main screen. If the Network icon is displayed, proceed to the Checking Computer Connections section described below. If it is not displayed, move to [Settings]-[Wireless Network(SSID)]. SSID : Service Set Identifier In the [Wireless Network(SSID)] window, select the SSID to which you want to connect your Digital Photo Frame to. If no available SSID is displayed, click [Refresh Networks] to update the list. If the "Connected" message is displayed, it means that your Digital Photo Frame is connected to the network. Checking Computer Connections Check whether the PC icon is displayed at the top left of the screen. If the PC icon[ ] is displayed, move to the Main screen. [. . . ] It is widely used in various digital products such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. An SD card is a Flash memory card the size of a postage stamp. It provides SD Card (Secure Digital Card) high stability and high capacity. It is widely used in various digital products such as PDAs, digital cameras, MP3 players, cell phones, and notebook PCs. [. . . ]