User manual SAMSUNG SR8751

[. . . ] SR8730 SR8750 SR8751 Vacuum Cleaning Robot user manual This manual is made with 100 % recycled paper. ✻ Before operating this unit, please read the instructions carefully. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. samsung. com/register DJ68-00682F(0. 0). indd 01 2012. 9. 7 9:17:8 AM safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. [. . . ] • Turn off the Power Switch and move the cleaning robotic vacuum to another place to clean. • Lift up the Vacuum cleaning Robot, manually dock the robotic onto the charger to charge it. • Has the vacuum cleaning robot become hooked on wires on the floor?• Is the Vacuum cleaning Robot stuck to the floor where there is a height difference?- The driving wheel is lifted. • Is there a thin towel (cloth) • Turn off the Power Switch and wrapped around the driving wheel?• Is the Vacuum cleaning Robot stuck on the doorsill?The suction power is weak while cleaning. • Check whether the dust bin is full of dust. • Check whether the suction inlet is clogged by foreign substances. • Check whether the Filter is clogged. • Turn off the Power Switch and move the Vacuum cleaning Robot to another place to clean. • Stop the Vacuum cleaning Robot and empty the dust bin. • Turn off the Power Switch and remove the foreign substances on the suction inlet. • Clean the Filter well. 36_ troubleshooting DJ68-00682F(0. 0). indd 36 2012. 9. 7 9:17:22 AM Symptom Vacuum cleaning Robot cannot find the charger. Checklist • Check whether the power plug of the charger is plugged correctly into the outlet. • If there are any obstacles within a range of about 1m in front of the charger and about 0. 5m range to the left and right of the charger, you should remove the obstacles. • If there are any foreign substances on the change pin, wipe them off with a dry towel. Measure to Take 05 TROUBLESHOOTING troubleshooting _37 DJ68-00682F(0. 0). indd 37 2012. 9. 7 9:17:22 AM TROUBLESHOOTING FOR ERROR CODES ERROR CODE CAUSE • Vacuum cleaning Robot is caught, stuck or trapped while navigating. SOLUTION • Turn off the Power Switch at the bottom and move the Vacuum cleaning Robot to a different location. • Turn off the Power Switch at the bottom and remove the foreign substance from the power brush. • Turn off the Power Switch at the bottom and remove the foreign substance from the left driving wheel. • Turn off the Power Switch at the bottom and remove the foreign substance from the right driving wheel. • Slightly pull the stuck bumper outward. Flash • A foreign substance (string, paper, toy etc. ) is caught in the power brush. • A foreign substance (string, paper, toy etc. ) is caught in the left driving wheel. Flash Flash • A foreign substance (string, paper, toy etc. ) is caught in the right driving wheel. • Check bumper sensor. Flash Flash Flash Flash Flash Flash Flash Flash Flash • A foreign substance (dust, stain • Turn off the Power Switch at the bottom etc. ) is on the Obstacle sensor and wipe the foreign substance from the window. front and rear sensor windows using a soft cloth. [. . . ] You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found. one line to give the library’s name and an idea of what it does. [. . . ]