User manual SAMSUNG SR8950

[. . . ] Before operating this unit, please read the instructions carefully. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. Before operating the appliance, please read this manual thoroughly and retain it for your reference. [. . . ] Operating _23 Setting the Time The clock displays the current time. You can change the current time with the following steps. You can only set the time using the remote control. Press the or button to set the day of the week. - The value you set will blink and the settings are completed. Blinks Canceling the Settings Remote Control - Press the Start/Stop button to cancel the settings and exit Time Set mode. If there is no input for 1 minute while you are setting the time, the cleaner exits Time Set mode automatically. 24_ operating Installing the VIRTUAL GUARD You can confine the vacuum cleaning robot to a particular section by using Fence (virtual wall) mode. Turn the Power Button on - Whenever you press the Power button, Fence (virtual wall) mode Power off is selected in this sequence. 5m at minimum and may differ depending on surroundings and movement status of the robot. Forming a Fence (virtual wall) VIRTUAL GUARD creates an invisible barrier that the vacuum cleaning robot cannot cross. In front of pots, furniture, the front door, and so on. Turn the Fence (virtual wall) mode on using the Power button. Install the VIRTUAL GUARD in front of the area you A fence (virtual wall) want to block access from the vacuum cleaning robot. - Install the VIRTUAL GUARD so that the distance detection sensor can form an invisible barrier that the vacuum cleaning robot cannot cross. Distance Sensor operating _25 About the IrDA sensor CAUTION · The infrared signal transmission may not be [Infrared Signal Priority] smooth in locations exposed to halogen lamps or in outdoor locations. ⷠVacuum cleaning robot uses 3 types of infrared > > devices and a device may not work in front of another device with a higher priority. remote Virtual Charger · When controlling the vacuum cleaning robot Control guard with the remote control, the vacuum cleaning robot may cross the virtual fence of the VIRTUAL GUARD or run against an obstacle, because the remote control signal has a higher priority than the VIRTUAL GUARD signal. ⷠWhen using the vacuum cleaning robot in a small location or at a close distance, it may malfunction due to interference of the infrared signals. ⷠInstall the VIRTUAL GUARD away from the charger as auto charging may be interrupted if the VIRTUAL GUARD is near the charger. ⷠIf more than one vacuum cleaning robot is used simultaneously, they may malfunction due to interference of the infrared signals. 26_ operating USING THE VACUUM CLEANING ROBOT Starting/Stopping Cleaning You can run or stop all vacuum cleaning robot functions. [. . . ] ⷠTurn off the at the bottom, and then remove the obstacle from the front of the vacuum cleaning robot or move it to a different location. ⷠTurn off the Power Switch at the bottom and wipe the foreign substance from the front and rear sensor windows using a soft cloth. Turn off the Power Switch at the bottom and stain etc. ) is on the Cliff sensor wipe the foreign substance on the cilff sensor window. [. . . ]