User manual SAMSUNG SRF528DSIS

[. . . ] Refrigerator user manual English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. samsung. com/register Free Standing Appliance features of your new refrigerator KEY FEATURES OF YOUR NEW REFRIGERATOR Your Samsung Refrigerator comes equipped with various innovative storage and energy-efficient features. · TwinCoolingSystem The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system, the Freezer and Refrigerator cool more efficiently. Additionally, this separate air flow system prevents food odor of one compartment from seeping into other compartments. · Bigger&WiderSpace The wide shelf area provides enough space for larger items. [. . . ] Lift up the freezer door from the rails. Be careful not to drop and scratch the freezer door. dISASSEMblING ThE FREEzER dOOR (SWING TYpE) Middle hinge 1. Separate the Cap on the Middle Hinge. 2. Remove the screw attached to the left and right middle hinges with a philips screwdriver(+). Remove the 2 hex head bolts attached to the left and right middle hinges with an allen wrench(Ø5mm). 3. Remove the Middle Hinge connected to the Freezer. 4. Lift up the freezer door from the hinge. Be careful not to drop and scratch the freezer door. 16_ setting up setting up your refrigerator REASSEMblING ThE FRIdGE dOOR 01 SETTING Up 1. Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+). 2. Insert and tighten the 2 hex head bolts into the left and right middle hinges with an allen wrench(Ø5mm). 3. Place the hole in the bottom of the left door over the middle hinge. 5. Insert the left upper hinge shaft into the hole on the corner of the fridge door. 6. Insert the upper hinges into the holes at the top of the door. Insert and tighten the 3 hex head bolts into the left and right upper hinges with a socket wrench(10mm). 7. Insert and tighten the ground screw into the left and right upper hinges with a philips screwdriver(+). 8. Connect the electronic wire on the top of the refrigerator. 9. Insert and tighten the 3 screws into the top table with a philips screwdriver(+). setting up _17 REASSEMblING ThE FREEzER dOOR (dRAWER TYpE) Slot 1. Pull out the rails to the full length on each sidle of the cabinet evenly. 2. Hang the freezer door front onto open slot on the sides. 3. With the 10mm wrench, reattach 4 bolts to connect the rail with the door. 4. Replace the drawer box. REASSEMblING ThE FREEzER dOOR (SWING TYpE) 1. Place the hole in the bottom of the freezer door over the right side low hinge. 2. [. . . ] · Was anything dropped behind or under the refrigerator?· A "ticking" sound is heard from inside the refrigerator. It is normal and occurs because various accessories are contracting or expanding according to the temperature of the refrigerator interior. · Some heat is normal as anti-condensators are installed in the horizontal hinged section of the refrigerator to prevent condensation. [. . . ]