User manual SAMSUNG SRF890SWLS

[. . . ] Refrigerator user manual This manual is made with 100 % recycled paper. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. samsung. com/register Free Standing Appliance safety information • Because these following operating instructions • Before operating the cover various models, the appliance, please read this characteristics of your manual thoroughly and refrigerator may differ slightly retain it at a safe place near from those described in this the appliance for your future manual and not all warning reference. • Use this appliance only for If you have any questions its intended purpose as or concerns, contact your described in this instruction nearest service center or find manual. This appliance is not help and information online intended for use by persons at www. samsung. com. [. . . ] 1) Door Alarm Function If the door alarm is set to On, an alarm beeps if any refrigerator door is left open for more than three minutes. The beeping stops when you close the door. The door alarm function is pre-set to On in the factory. You can turn it off by pressing and then releasing the Alarm button. You can turn it back on in the same fashion. The icon lights up when the function is on. When the Door Alarm function is on and the alarm sound is triggered, the Door Alarm Icon will blink while the alarm sounds. 2) Water Filter Life Indicator Function After you replace the water filter, touch and hold this button for 3 seconds to reset the water filter life indicator. When you reset the water filter life indicator, the Filter icon on the panel turns Off. The Filter icon will turn red to let you know it is time to change the water filter after six months (about 300 gallons). Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly. If this is the case in your area, you will have to change the filter more frequently than every six months. 02 OPERATING (1) Energy Saver Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights. Turn Energy Saver off and the icon goes off. The Energy Saver function’s factory setting is “ON”. If condensation or water drops appear on the doors, turn the Energy Saver mode off. The Freezer button serves two purposes: - To set the Freezer to your desired temperature. - To turn the power freeze function on and off. 1) To set the Freezer temperature Touch the Freezer button to set the Freezer to your desired temperature. You can set the temperature between -15 °C and -23 °C. 2) Power Freeze function Touch and hold this button for 3 seconds to decrease the time needed to freeze products in the Freezer. It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the freezer has warmed dramatically (For example, if the door was left open). [. . . ] • Is the water line connected and the shut-off valve opened?• Is the Sparkling water icon selected?• Is the Sparkling Water Production Function Off icon on?Press the Cubed/Crushed button for 3 seconds to turn on sparkling water production. [. . . ]