User manual SAMSUNG SV-231B

[. . . ] VIDEO CASSETTE RECORDER SV-633B SV-630B SV-6303B SV-233B SV-231B SV-230B Instruction Manual www. samsungvcr. com PAL Safety Precautions About this manual GB CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. REFER TO QUALIFIED SERVICE PERSONNEL. DANGER This symbol is intended to alert you to the presence of dangerous voltage within the product. Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner's Instructions contain much valuable information on setting up and using your VCR. [. . . ] Result: The selected station is displayed at the same time on the television screen. To change the programme number assigned to a station (PR4 instead of PR1 for example): x Press OK x Press the " or buttons until the cursor is placed in front of the programme to which the station is to be moved x Press OK again You can modify this station by repeating the same procedure from Step 6 onwards. On completion, press the MENU button three times to exit the menu. COLOUR SYSTEM IPC FORMAT 16:9 NICAM " :ON :E180 :AUTO :ON :AUTO :ON END: MENU ** TV STATION TABLE ** PR CH NAME 1 021 ---2 025 ---3 030 --- 4 ( 065 ---- ) 5 (SORT : 4 4) " EXECUTE:OK MENU 5 6 5(SV-233B/SV-231B/SV-230B) OPTIONS OSD 6 Press MENU twice to exit the menu. TAPE SELECT COLOUR SYSTEM IPC :ON :E180 :AUTO :ON 7 " END: MENU ** TV STATION TABLE ** PR CH NAME 1 ( 065 ---- ) 2 025 ---3 030 ---4 065 ---5 (SORT : 4 1) " EXECUTE:OK MENU 8 9 Selecting the Recording Speed You can record a cassette at two different speeds: x SP (Standard Play) ** TV STATION TABLE ** PR CH NAME 1 065 ---2 021 ---3 025 ---4 030 ---5 " SET: DELETE:CLR/RST x LP (Long Play) In Long Play modes: x Each cassette lasts twice as long x The recording is of a slightly lower quality To record a cassette. . . In standard play mode In long play mode Press the SPEED button on the remote control, until. . . Type E-180 E-240 E-260 E-300 Recording Time (in SP) 180 mins. or 5 hours SORT:OK MENU SP is displayed. LP is displayed. C RE UD IO D EE SP OK 20 21 NICAM 5(SV-633B/SV-630B/SV-6303B Only) B Protecting a Recorded Cassette GB PROG OPTIONS INSTALL NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 32. Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. 1 2 If you wish to protect a cassette, break off the tab using a small screwdriver. To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape. CLOCK BONUS LANG 1 2 3 USER SET Press MENU on the remote control. Result: The programming menu is displayed. Press the corresponding ", or , buttons to select the USER SET option. Press the OK button to select this option. Press the corresponding " or buttons, until the cursor is placed in front of the NICAM option. Mono mode Press or , until. . . 1 " !!!! OK END: MENU OPTIONS OSD TAPE SELECT COLOUR SYSTEM IPC FORMAT 16:9 NICAM " :ON :E180 :AUTO :ON :AUTO :ON END: MENU Recording a Programme Immediately 4 5 OFF is displayed. OFF: Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions. Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 17 and 18. V-LOCK DISPLAY 4 1 2 3 Switch on the television. To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used). Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The VCR is switched on automatically. Select: x The station to be recorded using the PROG (" or ) buttons or x R/RST F. ADV NPUT EPEAT INDEX MENU TRK PROG NICAM mode ON is displayed. ON: Normally set at this position. C RE AU DI O 4 6 On completion, press MENU twice to exit the menu. C RE AU DI O 4 D EE SP 6 The AV1 or AV2 5(SV-633B/SV-630B/SV-6303B only) source using the INPUT button for a satellite tuner or external video source Result: The station number is displayed and the programme can be seen on the television. 5 OK 5 6 Select the recording speed by pressing the SPEED button as many times as required (see page 21). Hold REC (q) down for a while to start recording. [. . . ] A video cassette can only be inserted with the window side up and the safety tab facing you. Check if the safety tab is intact on the cassette. Was the STANDBY/ON button pressed to activate the timer?Re-check the recording start/stop time settings. [. . . ]