User manual SAMSUNG SV-4000

[. . . ] Video Cassette Recorder SV-4000 SV-940 SV-840 Instruction Manual www. samsungvcr. com PAL NTSC About this manual Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner's Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of your VCR's features. The instructions in this manual are for models, SV-4000, SV-940, and SV-840 . [. . . ] 5 Select the required day by pressing the buttons. or 6 Press to select the recording start time. 7 Select the required hour value by pressing the or buttons. 8 Press to select the minutes. 9 Select the required minute value by pressing the or buttons. 10 Press to select the recording end time. 11 Select the required recording end time by pressing the or buttons, following the same procedure as when selecting the recording start time. ENG-18 Checking a Preset Recording Playing a Cassette You can check your preset recordings: x When you have finished presetting the VCR x If you have forgotten which programmes will be recorded This function allows you to play back any pre-recorded cassette. 1 Switch on both the television and your VCR. 2 Insert the video cassette to be played. If the safety tab on the cassette is intact, press ll. Otherwise, the cassette is played automatically. When a cassette is loaded, the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. NTSC tapes can be played back but cannot be recorded with this VCR. 1 Insert the cassette. Press the TIMER button or, x Press MENU on the remote control. Result: The programming menu is displayed. x Press the OK button to select TIMER PROGRAMMING option. Result: The TIMER PROGRAMMING menu is displayed. 2 Press the programme. or buttons to select the required 3 To. . . Stop the playback Eject the cassette Then press. . . (EJECT). 3 Press the or buttons to select and change any values as required. For more details, refer to the previous page. 4 On completion, press MENU twice. Cancelling a Preset Recording You can cancel any programmes that are: x Incorrect x No longer required Adjusting Picture Alignment Manually The Picture Alignment feature allows you to adjust the alignment manually to obtain the best possible picture. When noise bars or streaks appear during playback, adjust alignment manually by pressing the PROG/TRK( or ) buttons until the picture is clear and stable. x The tracking bar disappears when you release the button. 1 Insert the cassette. Press the TIMER button or, x Press MENU on the remote control. Result: The programming menu is displayed. x Press the OK button to select TIMER PROGRAMMING option. [. . . ] 12 watts 41°F-104°F (5°C-40°C) 10%-75% 2. 8 Kg (net) 360 x 86 x 240 mm -8 dBm, 47 Kohm unbalanced -8 ± 3 dBm, 1 Kohm unbalanced 0. 4% max 42 dB min (IHF A filter) 100Hz - 8kHz 110-240V~50/60Hz Approx. 10 watts 41°F-104°F (5°C-40°C) 10%-75% 2. 8 Kg (net) 360 x 84 x 240 mm ENG-28 Problems and Solutions Before contacting the Samsung after-sales service, perform the following simple checks. Problem No power Explanation/Solution x Check that the power plug is connected to a wall outlet. x Have you pressed the VCR STANDBY/ON (STANDBY/ON) button? [. . . ]