User manual SAMSUNG SV-451GX

[. . . ] VIDEO CASSETTE RECORDER KAZETOV¯ VIDEOREKORDÉR VIDEOREKORDÉR SV-657GX SV-455GX SV-655GX SV-451GX SV-651GX SV-255GX SV-251GX Instruction Manual UÏivatelská Pfiíruãka Príruãka pre uÏívatel'a GB CZ SK www. samsungvcr. com PAL About this manual Contents Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner's Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of your VCR's features. The instructions in this manual are for models, SV-657GX, SV-655GX, SV-651GX, SV-455GX, SV-451GX, SV-255GX and SV-251GX. [. . . ] This one time, you must enter the station number manually by pressing the " or buttons. Refer to the following page if: x The programme number or times flash x You wish to modify the programme MENU button. 5 With SV-657GX/SV-655GX/SV-651GX/SV-455GX/ SV-451GX, you can select the recording speed (SP/LP). Press the SPEED button. 6 If the programme and times are correct, press the 7 Press the VCR STANDBY/ON (STANDBY/ON) 5 With SV-657GX/SV-655GX/SV-651GX/SV-455GX/ SV-451GX, you can select the recording speed (SP/LP). Press the SPEED button. 5 Hold the REC button down for a while to start recording. Result: The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 23). 5 Hold REC down for a while to start recording. Result: The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 23). 6 Press the REC button several times to increase the recording time in: x 30-minute intervals up to four hours x 1-hour intervals up to nine hours (LP) Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the VCR stops recording automatically. 6 To stop recording, press s once. x If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape. x If you reach the end of the tape while recording, the cassette rewinds automatically. 7 If you wish to cancel the recording before the end, press VCR STANDBY/ON (STANDBY/ON). 18 If the end of the tape is reached while recording: x The recording stops x The VCR automatically turns off Select VPS recording x Press the or buttons, 5(SV-657GX/SV-655GX) IPC + V button to activate the timer. Result: The Record indicator ( x Press the " or buttons If no cassette has been inserted when you press + NICAM until the ON or "-" indication VCR STANDBY/ON (STANDBY/ON) the Record IPC V is displayed. If the safety tab on the Do not select VPS unless you are sure the programme cassette has been broken, the cassette is NICAM you wish to record is broadcast with VPS. VPS ON (by selecting "ON" in the right - hand column on the screen), then you must set up the start-time 8 Refer to page 20 if you wish to: EXACTLY according to the published TV schedule. x Check that your VCR has been programmed Otherwise the timer recording won't take place. correctly x Cancel a preset recording Select the recording x Press the or buttons, speed 5(SV-657GX/ until the recording speed SV-655GX/SV-455GX only) selection flashes. The numbers next to each TV programme listing are ShowView code numbers, which x Press the " or buttons allow you to programme your videorecorder until the correct indication instantly with the remote control. Tap in the is displayed: ShowView code for the programme you · AUTO (Auto Tape Speed wish to record. Select) : see page 20 · SP (Standard Play) TM ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar · LP (Long Play) Development Corporation. 19 Using the Timer Programming Feature The Timer Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Before presetting a recording, check that the date and time are correct. Checking a Preset Recording Playing a Cassette This function allows you to play back any prerecorded cassette. Intelligent Picture Control The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. You can check your preset recordings: x When you have finished presetting the VCR x If you have forgotten which programmes will be recorded 1 Switch on both the television and your VCR. 2 Insert the video cassette to be played. If the safety tab on the cassette is intact, press II. [. . . ] The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly. 28 29 Problems and Solutions Before contacting the Samsung after-sales service, perform the following simple checks. Problem No power x x TV Frequency Table (System-D/K + B/G) Explanation/Solution Check that the power plug is connected to a wall outlet. Have you pressed the VCR STANDBY/ON (STANDBY/ON) button? [. . . ]