User manual SAMSUNG SV-465GX

[. . . ] Before you start reading this manual please check your model number. - 5(SV-465GX): Exceptions only for a certain model, for example SV-465GX. - Gray shaded areas marked with a star indicate instructions that are only relevant to one model. Features Chart Feature IPC (Intelligent Picture Control) Changing recording speed (SP/LP) Connecting an RCA Audio/Video cable Dual VCR/TV remote Control Hi-Fi A2/NICAM Audio Dubbing a Pre- recorded Cassette SV-465GX SV-940 SV-840 q q q q q q q q q q q q q q q q ENG-2 Contents Foreword Safety Instructions . Inserting Batteries in the Remote Control . [. . . ] Up to six programmes can be preset. 12 Press to select the the recording speed (AUTO/SP/LP). 13 Press the Before presetting a recording, check that the date and time are correct. or buttons to switch between the AUTO, SP (Standard Play) or LP (Long Play). 14 When you have finished, press the MENU button. 15 Press the VCR STANDBY/ON button to activate the timer. Result: Before starting recording, the VCR compares the timer duration with the remaining time on the cassette. 1 Insert the cassette. Press the TIMER button or, x Press MENU on the remote control. Result: The programming menu is displayed. x Press the OK button to select TIMER PROGRAMMING option. Result: The TIMER PROGRAMMING menu is displayed. Auto Tape Speed Select PROG PROG OPTIONS INSTALL CLOCK BONUS LANG TIMER PROGRAMMING OK END: MENU The VCR's "Auto Tape Speed Select" function compares the duration of the timer recording to the actual recording time remaining on the tape loaded. If there is insufficient tape to complete a timer recording in AUTO mode, the VCR automatically switches to LP mode to record the whole programme. If there is a one hour AUTO mode timer recording to be started, but only 40 minutes of tape remaining, the VCR will record in SP for 20 minutes and switch to LP mode for the remaining 40 minutes. 2 Press to select the input source. 3 Select the required station by pressing the , buttons or INPUT to select the LINE IN 1 or LINE IN 2 input sources. 1/JAN THU 21:28 PR DAY START STOP L1 WE 1 12:00 12:50SP -- ---- --:-- --:----- ---- --:-- --:----- ---- --:-- --:----- ---- --:-- --:----- ---- --:-- --:--- DELETE:CLR/RST MENU PROG 4 Press to select the recording day. 5 Select the required day by pressing the buttons. Result: All the recording information is deleted and the broadcast will not be recorded. 4 On completion, press MENU twice. ENG-19 Intelligent Picture Control Selecting the Colour Mode The Intelligent Picture Control Feature allows you to adjust the sharpness of the image automatically, according to your own preferences. Before recording or playing back a cassette, you can select the required system standard. 1 During playback, press the MENU button on the remote control. Result: The programming menu is displayed. 2 Press the corresponding , or , buttons to select the USER SET option. x When you playback an NTSC-recorded tape on this VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4. 43 compatible), set NT4. 43 and you can record NT4. 43. PROG OPTIONS OPTIONS INSTALL 1 Press MENU on the remote control. Result: The programming menu is displayed. CLOCK BONUS LANG USER SET 2 Press the corresponding END: MENU , or , buttons to OK select the USER SET option. 3 Press the OK button to select this option. 3 Press the OK button to select this option. Result: The USER SET menu is displayed. Result: The USER SET menu is displayed. 4 Press the corresponding 4 Press the corresponding IPC option is selected. OPTIONS or buttons, until the or buttons, until the COLOUR SYSTEM option is selected. 5 Press the button to select AUTO PAL MESECAM B/W or NT3. 58 NT4. 43 NTPB. AUTO When playing back a cassette, the system standard is automatically selected by the VCR. B/W Black and White OSD TAPE SELECT COLOUR SYSTEM NICAM IPC :ON :E180 :AUTO :ON :ON END: MENU 6 On completion, press MENU twice to exit the menu. 5 Press the button to select the IPC (intelligent When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically. picture control) option. 6 To adjust the sharpness manually, press the button to turn the IPC mode OFF. 7 Press the or buttons until the picture is displayed according to your preferences. If you do not press a button within ten seconds, the PICTURE menu disappears automatically. 8 On completion, press the MENU button again. ENG-20 Selecting the Audio Output Mode 5 (SV-465GX Only) Playing a Cassette in Slow Motion 5 (SV-465GX/SV-940 Only) When monitoring a TV programme or playing back a HiFi recorded video tape, press the AUDIO button to select a desired sound output. As the AUDIO button is pressed, the sound output and the indicator change as below: Sound type OSD display You can play a cassette in slow motion. No sound is heard when playing back a cassette in slow motion. 1 Press: Stereo sound Heard in Bilingual sound Standard sound broadcast x ll to start playing the cassette x SLOW ( ) as many times as required to decrease or increase the speed respectively SLOW L R stereo. (left Channel I (MAIN) Heard in heard from the monaural. [. . . ] Example: For programme 12, press -/-- followed by numeric buttons 1 and 2. Used to adjust the volume of the television. Used to switch between an external source and the television INPUT VOL + or ­ PROG/TRK ( or) DISP. / The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly. ENG-27 Technical Specifications Design and specifications are subject to change without notice. MODEL Format Heads SV-465GX VHS PAL/NTSC standard Video: 4 rotary heads Hi-Fi audio:2 rotary heads Audio/Control: 1 stationary head Erase: 1 full track erase head VHF-I, VHF-III, UHF, Interband/ Hyperband STANDARD B/G, D/K, A2/NICAM STEREO FM azimuth recording PAL/MESECAM/NTSC: Down converted subcarrier phase shifted direct recording NTSC PB on PAL TV <PAL/MESECAM> <NTSC> SP 23. 39 mm/sec SP 33. 35 mm/sec LP 11. 69 mm/sec SLP 11. 12 mm/sec <PAL/MESECAM> <NTSC> SP 3 hours (E-180 Tape) SP 2 hours (E-120 Tape) LP 6 hours (E-180 Tape) SLP 6 hours (E-180 Tape) About 100 sec in REW with E-180 SV-940/SV-840 VHS PAL/NTSC standard Video: 2 rotary heads (SV-840) Video: 4 rotary heads (SV-940) Audio/Control: 1 stationary head Erase: 1 full track erase head VHF-I, VHF-III, UHF, Interband/ Hyperband STANDARD B/G, D/K FM azimuth recording PAL/MESECAM/NTSC: Down converted subcarrier phase shifted direct NTSC PB on PAL TV <PAL/MESECAM> <NTSC> SP 23. 39 mm/sec SP 33. 35 mm/sec LP 11. 69 mm/sec SLP 11. 12 mm/sec <PAL/MESECAM> <NTSC> SP 3 hours (E-180 Tape) SP 2 hours (E-120 Tape) LP 6 hours (E-180 Tape) SLP 6 hours (E-180 Tape) About 100 sec in REW with E-180 Receiving channel Television system Luminance Colour system recording Tape speed Recording/playback time REW time VIDEO Input Output Signal-to-noise ratio Horizontal resolution 0. 5 to 2. 0 Vp-p; 75 ohm unbalanced 1. 0 ± 0. 2 Vp-p; 75 ohm unbalanced Better than 43 dB (SP) More than 240 lines 0. 5 to 2. 0 Vp-p; 75 ohm unbalanced 1. 0 ± 0. 2 Vp-p; 75 ohm unbalanced Better than 43 dB (SP) More than 240 lines AUDIO Input Output Wow and flutter (WTD) Signal-to-noise ratio Frequency response Power requirement Power consumption Operation temperature Operation humidity Weight Dimensions (WxHxD) -8 dBm, 47 Kohm unbalanced -8 ± 3 dBm, 1 Kohm unbalanced 0. 4% max (SP) 68 dB min (IHF A filter) 20Hz - 20kHz 110-240V~50/60Hz Approx. [. . . ]