User manual SAMSUNG SV-5L INTRODUCTION

[. . . ] Stop the playback Eject the cassette (STOP). (EJECT). Selecting the Appropriate System Standard Before recording a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. Aerial Connector N Aerial input AV input VIDEO AUDIO LINE IN 1 Coaxial Cable RCA Cable (Not supplied) TV LINE OUT When playing back a cassette, the standard is automatically selected by the VCR. N When you playback an NTSC-recorded tape on this VCR make a setting on the color system according to your TV. [. . . ] Also, you can change the VCR output channel to adjust the frequency in which information is displayed on the screen. 7 If you cannot find the pictures and sound, or there is interference from nearby channels, change the VCR OUTPUT CHANNEL to adjust the frequency. 1 During playback, press the MENU button on the remote control. 2 Press the corresponding or buttons to select the USER SET option. 7 Press the or buttons until the picture is displayed according to your preferences. To adjust the sharpness manually press the SHARPNESS L or M button on the front of the VCR. 8 When the picture and sound are perfectly clear store this channel at the desired programme position on the television. Result: That programme is now reserved for use with your VCR. 1 Press MENU on the remote control. Result: The programming menu is displayed. 3 Press the button to select this option. 4 Press the corresponding or buttons, until the IPC option is selected. 5 Press the button to select the IPC (intelligent picture control) option. Result: The PICTURE menu appears on the display. When intelligent picture control mode is ON, the sharpness of the image is adjusted automatically. If you do not press a button within ten seconds, the PICTURE menu disappears automatically. 2 Press the corresponding or buttons to select the INSTALLATION option. 3 Press the button to select this option. Result: The INSTALLATION menu is displayed. 4 Press the corresponding or buttons, until the VCR OUTPUT CH option is selected. 5 Select the required output channel (CH21~CH69) by pressing the or buttons. 8 On completion, press the MENU button again. 6 On completion, press MENU twice to exit the menu. Then tune your television again. 6 To adjust the sharpness manually, press the button to turn the IPC mode OFF. Playing a Sequence Frame by Frame You can: N Stop the cassette at a given frame (image) N Advance one frame at a time No sound is heard when playing back frame by frame. Selecting the Recording Speed You can record a cassette at two different speeds: N SP (Standard Play) N LP (Long Play) In Long Play modes: N Each cassette lasts twice as long N The recording is of a slightly lower quality To record a cassette. . . In standard play mode In long play mode Type E-180 E-240 E-260 E-300 Auto Power Off The Auto Power Off feature automatically turns off your VCR if no signal is received and you do not press any button for the selected time. Auto Repeat Play You can set repeat play to repeat the tape continuously from beginning to end. 1 Press MENU on the remote control. Result: The menu is displayed. 2 Press the corresponding or buttons to select the EASY OPERATION option. 1 Press MENU on the remote control. Result: The programming menu is displayed. 1 Press: N to start playing the cassette N IIP/S to stop the tape at a given frame N IIP/S to advance frame by frame 2 To return to normal playback, press . Press the SPEED button on the remote control, until. . . LP is displayed. 3 Press the button to select this option. Result: The EASY OPERATION menu is displayed. 4 Press the corresponding or buttons, until the AUTO POWER OFF option is selected. 5 Press the button, until you select the time of Auto Power off interval. OFF 2HOUR 3HOUR 2 Press the corresponding or buttons to select the EASY OPERATION option. 3 Press the button to select this option. Result: The EASY OPERATION menu is displayed. 4 Press the corresponding or buttons, until the REPEAT PLAY option is selected. [. . . ] Result: The VCR stops automatically when the counter reaches zero. 10 watts 41°F-104°F (5°C-40°C) 10%-75% 2. 8 Kg (net) 360 x 94 x 240 mm VCR ANTENNA IN L H ON V IDEO OUT OUT TO TV ATT ON OFF AUDIO OUT TEST OFF IN FROM ANT. Power requirement Power consumption Operation temperature Operation humidity Weight Dimensions (WxHxD) VIDEO AUDIO LINE IN 1 TV VIDEO OUT AUDIO OUT RF OUT LINE OUT VIDEO IN AUDIO IN 1 Turn on the TV. 2 Connect the playback side VCR's A/V cable to the recording side VCR's video and audio in (rear panel). 3 Begin playback on the playback side VCR and hold down REC (G) button. [. . . ]