User manual SAMSUNG SV-641X/NSI

[. . . ] VIDEO CASSETTE RECORDER SV-640X SV-445X SV-245X SV-240X Instruction Manual www. samsungvcr. com PAL About this manual Contents GB Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner's Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of your VCR's features. The instructions in this manual are for models, SV-640X, SV-445X, SV-245X and SV-240X. [. . . ] Press the corresponding " or buttons, until the G-CODE option is selected. A message is displayed to allow you to enter the Result: G-CODE code. 1 ** TIMER METHOD ** STANDARD G-CODE 4 If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 28 if you wish to cancel a preset recording. Press the numeric buttons to enter the code opposite the pro gramme that you wish to record in your television magazine. 5 If you wish to correct the G-CODE code that you are entering: x Press the button until the digit to be corrected is cleared x Enter the correct digit Press the MENU button. Result: The information concerning the programme is displayed. " END: MENU G-CODE CODE --------- When using the G-CODE function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the " or buttons. Refer to the following page if: x The programme number or times flash x You wish to modify the programme CODE:0-9 CORRECT: END:MENU 5(SV-640X) 6 7 If the programme and times are correct, press the MENU button. Press the VCR STANDBY/ON (STANDBY/ON) button to activate the timer. IPC + V The Timer indicator ( ) is displayed. (SV-640X) Result: The REC indicator dim the light. (SV-245X) NICAM PROG If no cassette has been inserted when you press VCR STANDBY/ON (STANDBY/ON) the Timer indicator flashes. If the safety tab on the cassette has been broken, the cassette is ejected. Insert the appropriate cassette. PR L1 -----" 1/JAN MON 21:28 DAY STARTSTOP MO 1 12:0012:50SP ---- --:----:------- --:----:------- --:----:------- --:----:------- --:----:--- DELETE:CLR/RST MENU 5(SV-245X) 8 Refer to page 28 if you wish to: x Check that your VCR has been programmed correctly x Cancel a preset recording PROG The numbers next to each TV programme listing are G-CODE code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the G-CODE code for the programme you wish to record. PR L1 -----" 1/JAN MON 21:28 DAY STARTSTOP MO 1 12:0012:50 ---- --:----:----- --:----:----- --:----:----- --:----:----- --:----:- DELETE:CLR/RST TM G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is manufactured under licence from Gemstar Development Corporation. MENU 25 Modifying G-CODE Programming 5(SV-640X/SV-245X Only) Using the Timer Programming Feature The Timer Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. GB If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press MENU a second time to confirm. Select an input source other than the tuner LINE IN 1 or LINE IN 2 input Then. . . x Press the or buttons, until the PR selection flashes. x Press the INPUT button one or more times to change the Before presetting a recording, check that the date and time are correct. SPEED DUB TV/VCR TIMER 1 input source selection. Record a programme every day (Monday to Sunday) at the same time Record a programme every week on the same day and at the same time The input source must be selected before changing any other value. x Press the or buttons, until the DAY selection flashes. x Press the " or buttons, until the DLY (Daily) value is - Insert the cassette. Press the " or buttons to select the STANDARD option and then press the !button or, x Press MENU on the remote control. Result: The programming menu is displayed. x Press the OK button to select TIMER PROGRAMMING option. Result: The TIMER PROGRAMMING menu is displayed. [. . . ] Problem No power MODEL Format Heads SV-640X VHS PAL standard Video: 4 rotary heads SV-445X/SV-245X/SV-240X VHS PAL standard Video: 4 rotary heads (SV-445X) Video: 2 rotary heads (SV-245X/SV-240X) Audio/Control: 1 stationary head Erase: 1 full track erase head VHF-I, VHF-III, UHF, lnterband/ Hyperband STANDARD B/G FM azimuth recording PAL/MESECAM/NT4. 43: Down converted subcarrier phase shifted direct recording NTSC PB on PAL TV SP 23. 39 mm/sec LP 11. 69 mm/sec (SV-445X only) SP 3 hours (E-180 Tape) LP 6 hours (E-180 Tape) (SV-445X only) About 60 sec in REW with E-180 You cannot insert a video cassette The television programme was not recorded x x Explanation/Solution Check that the power plug is connected to a wall outlet. Have you pressed the VCR STANDBY/ON (STANDBY/ON) button?A video cassette can only be inserted with the window side up and the safety tab facing you. Check if the safety tab is intact on the cassette. [. . . ]