User manual SAMSUNG SV-645X/CZE

[. . . ] VIDEO CASSETTE RECORDER SV-645X SV-641X SV-445G SV-441G SV-245G SV-241G Instruction Manual www. samsungvcr. com PAL About this manual Contents GB Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner's Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of your VCR's features. The instructions in this manual are for models, SV-645X, SV-641X, SV-445G, SV-441G, SV-245G and SV-241G. [. . . ] At the end of that time, the VCR stops recording automatically. If you wish to cancel the recording before the end, press VCR STANDBY/ON (STANDBY/ON). 3 5(SV-645X/SV-445G) CT VCR INPUT REPEAT DISP. / OL PROG/TRK RK PROG 5(SV-641X/SV-441G/ SV-245G/SV-241G) IPC INPUT 4 4 4 REPEAT DISPLA 4 4 REC MENU 5 5 5 OK 5 SPEED DUB TV/VCR TIMER 6 LENGTH 2:30 SET LENGTH : PRESS REC 7 If the end of the tape is reached while recording: x The recording stops x The VCR automatically turns off 26 Using the ShowView Feature 5(SV-645X/SV-445G/SV-245G Only) Before presetting your VCR: x Switch on both the television and your VCR x Check that the date and time are correct x Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset. " GB ** TIMER METHOD ** STANDARD SHOWVIEW END: MENU 1 2 3 Press the TIMER button. Result: Press the corresponding option is selected. " or buttons, until the SHOWVIEW SHOWVIEW CODE --------- Press the !button to select SHOWVIEW. A message is displayed to allow you to enter the Result: ShowView code. 4 If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 30 if you wish to cancel a preset recording. CODE:0-9 CORRECT: END:MENU Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine. 5(SV-645X) If you wish to correct the ShowView code that you are entering: x Press the button until the digit to be corrected is cleared x Enter the correct digit PROG 5 Press the MENU button. The information concerning the programme is displayed. Result: PR 1 -----" 1/JAN MON 21:28 DAY STARTSTOP V/P MO 1 12:0012:50SP ON ---- --:----:---- ---- --:----:---- ---- --:----:---- ---- --:----:---- ---- --:----:---- DELETE:CLR/RST MENU When using the ShowView function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the " or buttons. Refer to the following page if: x The programme number or times flash x You wish to modify the programme 5(SV-445G) 6 7 If the programme and times are correct, press the MENU button. Press the VCR STANDBY/ON (STANDBY/ON) button to activate the timer. V The Record indicator ( ) is displayed. Result: If no cassette has been inserted whenV you press STANDBY/ON the Record indicator ( ) flashes. If the safety tab on the cassette has been broken, the cassette is ejected. Insert the appropriate cassette. 1/JAN MON 21:28 PROG PR DAY STARTSTOP 1 MO 1 12:0012:50SP -- ---- --:----:----- ---- --:----:---IPC + -- ---- --:----:----- ---- --:----:----- ---- --:----:---" NICAM DELETE:CLR/RST IPC + MENU NICAM 5(SV-245G) 8 Refer to page 30 if you wish to: x Check that your VCR has been programmed correctly x Cancel a preset recording PROG The numbers next to each TV programme listing are ShowView code numbers, which allow you to programme your videorecorder instantly with the remote control. Tap in the ShowView code for the programme you wish to record. PR 1 -----" 1/JAN MON 21:28 DAY STARTSTOP MO 1 12:0012:50 ---- --:----:----- --:----:----- --:----:----- --:----:----- --:----:- DELETE:CLR/RST MENU TM ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar Development Corporation. 27 Modifying ShowView Programming 5(SV-645X/SV-445G/SV-245G Only) Using the Timer Programming Feature The Timer Programming feature allows you to preset the VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. GB 5(SV-645X/SV-445G/SV-245G) If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so before you press MENU a second time to confirm. Select an input source other than the tuner AV1, AV2 or AUX Then. . . x Press the or buttons, until the PR selection flashes. x Press the INPUT button one or more times to change the 1 Before presetting a recording, check that the date and time are correct. ** TIMER METHOD ** STANDARD input source selection. Result: The programme number is replaced by: · A1, A2 or AU for a satellite tuner or external video input (used by another VCR for example) Record a programme every day (Monday to Sunday) at the same time Record a programme every week on the same day and at the same time - Insert the cassette. Press the " or buttons to select the STANDARD option and then press the !button or, x Press MENU on the remote control. Result: The programming menu is displayed. [. . . ] Problem MODEL Format Heads SV-645X/SV-641X VHS PAL standard Video: 4 rotary heads Hi-Fi audio: 2 rotary heads Audio/Control: 1 stationary head Erase: 1 full track erase head VHF-I, VHF-III, UHF, Interband/ Hyperband STANDARD B/G-D/K-A2/NICAM FM azimuth recording PAL/MESECAM/NT4. 43: Down converted subcarrier phase shifted direct recording NTSC PB on PAL TV SP 23. 39 mm/sec LP 11. 69 mm/sec SP 3 hours (E-180 Tape) LP 6 hours (E-180 Tape) About 60 sec in REW with E-180 SV-445G/SV-441G/SV-245G/SV-241G VHS PAL standard Video: 4 rotary heads (SV-445G/SV-441G) Video: 2 rotary heads (SV-245G/SV-241G) Audio/Control: 1 stationary head Erase: 1 full track erase head VHF-I, VHF-III, UHF, Interband/ Hyperband STANDARD B/G-D/K FM azimuth recording PAL/MESECAM/NT4. 43: Down converted subcarrier phase shifted direct recording NTSC PB on PAL TV SP 23. 39 mm/sec LP 11. 69 mm/sec (SV-445G/SV-441G) SP 3 hours (E-180 Tape) LP 6 hours (E-180 Tape) (SV-445G/SV-441G) About 60 sec in REW with E-180 No power x x Explanation/Solution Check that the power plug is connected to a wall outlet. Have you pressed the VCR STANDBY/ON (STANDBY/ON) button?A video cassette can only be inserted with the window side up and the safety tab facing you. Check if the safety tab is intact on the cassette. [. . . ]