User manual SAMSUNG SV-661GX INTRODUCTION

[. . . ] VIDEO CASSETTE RECORDER KAZETOV¯ VIDEOREKORDÉR VIDEOREKORDÉR SV-665GX SV-661GX SV-465GX SV-461GX SV-265GX SV-261GX GB Instruction Manual UÏivatelská Pfiíruãka Príruãka pre uÏívatel'a CZ SK www. samsungvcr. com PAL About this manual Contents Thank you for purchasing a Samsung Video Cassette Recorder (VCR). Your Owner's Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of your VCR's features. The instructions in this manual are for models, SV-665GX, SV-661GX, SV-465GX, SV-461GX, SV-265GX and SV-261GX. [. . . ] If all six programmes have been set, the message TIMER IS FULL is displayed. Refer to page 20 if you wish to cancel a preset recording. the television channel reserved for use with your VCR (or the AV input if used). 1 Switch on the television. 2 To monitor the programme being recorded, select the television channel reserved for use with your VCR (or the AV input if used) 4 Press the numeric buttons to enter the code opposite the programme that you wish to record in your television magazine. If you wish to correct the ShowView code that you are entering: x Press the button until the digit to be corrected is cleared x Enter the correct digit until the PR selection flashes. x Press the INPUT button one or more times to change the input source selection. Result: The programme number is replaced by: · A1, A2 or AU for a satellite tuner or external video input (used by another VCR for example) The input source must be selected before changing any other value. 3 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The VCR is switched on automatically. 3 Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape. Result: The VCR is switched on automatically. Record a programme x Press the or buttons, every day (Monday to until the DAY selection Sunday) at the same time flashes. x Press the or buttons, until the DLY (Daily) value is displayed. Record a programme x Press the or buttons, every week on the same until the DAY selection day and at the same time flashes. x Press the or buttons, until the W- (Week) value is displayed, followed by the required day. Example: W-SA (Weekly Saturday) Extend the recording time x Press the or buttons, until the STOP selection flashes. x Press the or buttons to increase or decrease the stop time. GB 4 Select: x 4 Select: The station to be recorded using the PROG/TRK ( or ) / PROG ( or ) buttons or x The AV1, AV2 or AUX 5(SV-665GX/ SV-661GX only) source using the INPUT button for a satellite tuner or external video source Result: The channel number is displayed and the programme can be seen on the television. x 5 Press the MENU button. Result: The information concerning the programme is displayed. When using the ShowView function for the first time with stored stations, the programme number flashes. This one time, you must enter the station number manually by pressing the or buttons. Refer to the following page if: x The programme number or times flash x You wish to modify the programme x The station to be recorded using the PROG/TRK ( or ) / PROG ( or ) buttons or The AV1, AV2 or AUX 5(SV-665GX/ SV-661GX only) source using the INPUT button for a satellite tuner or external video source Result: The station number is displayed and the programme can be seen on the television. 5 With SV-665GX/SV-661GX/SV-465GX/ SV-461GX, you can select the recording speed (SP/LP). Press the SPEED button. 6 If the programme and times are correct, press the MENU button. 5 With SV-665GX/SV-661GX/SV-465GX/ SV-461GX, you can select the recording speed (SP/LP). Press the SPEED button. 5 Hold the REC button down for a while to start recording. Result: The record indicator appears on the television screen and VCR display. An index is recorded on the tape (see page 23). 5 Hold REC down for a while to start recording. Result: The record indicator appears on the television and VCR display. An index is recorded on the tape (see page 23). 6 Press the REC button several times to increase the recording time in: x 30-minute intervals up to four hours x 1-hour intervals up to nine hours (LP) Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. [. . . ] 17 watts 41°F-104°F (5°C-40°C) 10%-75% 2. 8 Kg (net) 360 x 94 x 240 mm SV-465GX/SV-461GX/SV-265GX/SV-261GX VHS PAL standard Video: 4 rotary heads (SV-465GX/SV-461GX) Video: 2 rotary heads (SV-265GX/SV-261GX) Audio/Control: 1 stationary head Erase: 1 full track erase head VHF-I, VHF-III, UHF, Interband/Hyperband STANDARD B/G-D/K FM azimuth recording PAL/MESECAM/NT4. 43: Down converted subcarrier phase shifted direct recording NTSC PB on PAL TV SP 23. 39 mm/sec LP 11. 69 mm/sec (SV-465GX/SV-461GX) SP 3 hours (E-180 Tape) LP 6 hours (E-180 Tape) (SV-465GX/SV-461GX) About 60 sec in REW with E-180 0. 5 to 2. 0 Vp-p; 75 ohm unbalanced 1. 0 ± 0. 2 Vp-p; 75 ohm unbalanced Better than 43 dB (SP) More than 240 lines -8 dBm, 47 Kohm unbalanced -8 ± 3 dBm, 1 Kohm unbalanced 0. 4% max (SP) 42 dB min (IHF A filter) 100Hz - 8kHz 220-240V~ 50Hz Approx. 15 watts 41°F-104°F (5°C-40°C) 10%-75% 2. 8 Kg (net) 360 x 94 x 240 mm If several codes are indicated for your television brand, try each one in turn until you find one that works. When you change the batteries in the remote control, you must reprogramme the code, following the same procedure. Receiving channel Television system Luminance Colour system Tape speed Recording/playback time REW time VIDEO Input Output Signal-to-noise ratio Horizontal resolution AUDIO Input Output Wow and flutter (WTD) Signal-to-noise ratio Frequency response Power requirement Power consumption Operation temperature Operation humidity Weight Dimensions (WxHxD) 26 27 Problems and Solutions Before contacting the Samsung after-sales service, perform the following simple checks. Problem No power x x TV Frequency Table (System-D/K + B/G) Explanation/Solution Check that the power plug is connected to a wall outlet. Have you pressed the VCR STANDBY/ON (STANDBY/ON) button? [. . . ]